Whirlpool GB2SHKLLS00 manual Refrigerator Doors

Page 7

Refrigerator Doors

Handle Installation and Removal

(Graphics are included later in this section.)

1.Place handle on door as shown.

2.Using a Phillips screwdriver, attach handle to door with handle screws.

3.Place trim pieces on the upper and lower handle ends as shown.

4.Apply firm pressure with your hand on the face of the trim. Slide the top trim down and bottom trim up toward the handle.

5.Using a Phillips screwdriver, attach the freezer handle to the freezer door with the 2 screws provided.

6.To remove handles, reverse directions.

Door and Hinge Removal

Tools Needed: ⁵⁄₁₆-in., ³⁄₈-in., ¹⁄₄ in. hex-head socket wrench, a No. 2 Phillips head and a flat bladed screwdriver.

IMPORTANT:

■Before you begin, turn the refrigerator control OFF, unplug refrigerator or disconnect power. Remove food and any adjustable door or utility bins from doors.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.”

Cabinet

1.Remove hinge screws from handle side and move them to opposite side (see Graphic 1-1).

2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown (see

Graphic 1-2).

Refrigerator door

1.Remove refrigerator handle assembly as shown. Keep all parts together (see Graphic 2).

2.Remove door handle seal screw front. Move to opposite side of refrigerator door as shown (see Graphic 5).

3.Remove door stop. Move to opposite side of refrigerator door as shown (see Graphic 3).

4.Attach refrigerator handle on opposite side of the refrigerator door with the two screws as shown (see Graphic 2). Replace handle trim as shown.

5.Tighten all screws. Set aside door until hinges and freezer compartment door are in place.

Freezer door

1.Remove freezer handle assembly as shown. Keep all parts together (see Graphic 4).

2.Remove freezer door handle seal screw. Move to opposite side of freezer door.

3.Remove door stop. Move to opposite side of freezer door as shown (see Graphic 3).

4.Attach handle to opposite side of freezer door.

5.Tighten all screws. Set aside door until bottom hinge is installed on product.

⁵⁄₁₆" Hex-Head Top Hinge Screw

1.Unplug refrigerator or disconnect power.

2.Open freezer door and remove bottom hinge cover from the bottom front of the refrigerator.

3.Close the freezer door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door gasket magnets to hold the doors in place while you are working.

4.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door free from the cabinet.

5.Remove the center hinge pin and remove hinge screws as shown in the Center Hinge graphic. Lift the freezer door free from the cabinet.

6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

Door Reversal (optional on some models)

IMPORTANT: If you want to reverse your standard doors so they open from the opposite side, follow these steps. If you are not reversing the doors, see “Door and Hinge Replacement.”

Door Stop Screw

Door Handle Seal Screw Front

Flat-Head Handle Screw

Cabinet Hinge Hole Plug

Door and Hinge Replacement

NOTE: Graphic may be reversed if door swing is reversed.

1.Replace the parts for the bottom hinge as shown. Tighten screws. Replace the freezer door.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door gasket magnets to hold the doors in place while you are working.

2.Assemble the parts for the center hinge as shown and tighten all screws (see Center Hinge graphic). Replace the refrigerator door.

3.Assemble the parts for the top hinge as shown (see Top Hinge graphic). Do not tighten screws completely.

4.Line up the doors so that the bottom of the refrigerator door aligns evenly with the top of the freezer door. Tighten all screws.

Final Steps

1.Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover (see Top Hinge graphic).

2.Replace the bottom hinge cover.

3.Plug in refrigerator or reconnect power.

4.Reset the controls (see “Using the Controls” section).

5.Return all removable door parts to doors and food to product.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Guide d’utilisation Etd’entretien BOTTOM-MOUNT RefrigeratorRéfrigérateur Superposé Use & Care GuideTable DES Matières Before you throw away your old refrigerator or freezer Refrigerator SafetyLocation Requirements Refrigerator InstallationCleaning before use UnpackingElectrical Requirements For Automatic Ice Maker AccessoryWater Supply Connection Replacing the Base Grille Connecting to RefrigeratorBase Grille Removing the Base GrilleRefrigerator Doors Door Removal Replacement Ensuring Proper Air Circulation Refrigerator USEDoor Closing and Alignment Normal SoundsTurning the Ice Maker On/Off Using the ControlsAdjusting Control Settings Ice MakerCrisper and Crisper Cover Refrigerator FeaturesRefrigerator Shelves Meat Drawer and CoverFreezer Features Refrigerator Care Door FeaturesChanging the Refrigerator Light Bulb Power InterruptionsChanging the Light Bulb Vacation and Moving CareTroubleshooting Ice maker is producing too little ice on some models Temperature is too warmRefrigerator seems to make too much noise Ice maker is not producing ice on some modelsFor some models AccessoriesU.S.A CanadaCall Whirlpool Corporation will not pay forAvant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurNettoyage avant l’utilisation Installation DU RéfrigérateurEmplacement d’installation DéballageRaccordement de la canalisation d’eau Spécifications électriquesPour appareils avec machines à glaçons automatiques Pour replacer la grille de la base Grille de la baseRaccordement au réfrigérateur Pour enlever la grille de la baseEnlèvement des portes et des charnières Installation et enlèvement des poignées de porteRéinstallation Portes et charnières Portes du réfrigérateurInspecter tous les trous. Vérifier que tous les bouchons Étapes finalesSons normaux Fermeture et alignement des portesFermeture des portes Pour s’assurer d’une circulation d’air Appropriée Ajustement des réglages de commandeUtilisation des commandes Utilisation DU RéfrigérateurAugmentation du taux de production de glaçons Machine à glaçonsTablettes du réfrigérateur Mise en marche/arrêt de la machine à glaçonsRéglage de l’humiditédans les bacs àlégumes Sur certains modèles AccessoireTiroir à viande et couvercle Bac à légumes et couvercleCongélateur Entretien DU Réfrigérateur LA PorteRemplacement de lampoule du compartiment de réfrigération Remplacement de l’ampoule d’éclairageRemplacement de lampoule du compartiment de congélation Déménagement Pannes de courantDéménagement VacancesLe moteur semble fonctionner excessivement DépannageLes ampoules n’éclairent pas Le plat de dégivrage contient de l’eauLes portes sont difficiles à ouvrir La cloison entre les deux sections est tièdeLa température est trop tiède Il existe une accumulation d’humidité à l’intérieurAccessoires Assistance OU ServicePour certains modèles 12642707SP/2225034A Whirlpool Corporation ne paiera pas pour

GB2SHKLLS00 specifications

The Whirlpool GB2SHKLLS00 is a renowned side-by-side refrigerator that embodies modern convenience and efficiency. With its sleek stainless steel design, this appliance not only complements your kitchen aesthetics but also delivers functionality that meets everyday needs.

One of the standout features of the GB2SHKLLS00 is its ample storage capacity. With a total volume that caters to families of various sizes, it offers generous shelving options and adjustable door bins that provide flexibility for organizing groceries. The refrigerator section boasts crisp drawers designed to keep fruits and vegetables fresh while preventing moisture loss. Meanwhile, the ice and water dispenser conveniently located on the door allows easy access to chilled water and ice without opening the appliance, helping to maintain internal temperatures.

The technology incorporated into the GB2SHKLLS00 enhances user experience significantly. The Accu-Chill Temperature Management System ensures that food stays fresher for longer by effectively managing internal temperatures based on usage patterns. This is complemented by the Adaptive Defrost system, which monitors when the refrigerator is in use and defrosts only when necessary, contributing to energy efficiency.

Energy efficiency remains a crucial consideration, and Whirlpool addresses this with the GB2SHKLLS00 by incorporating eco-friendly technologies. It comes with an Energy Star rating, which signifies its ability to reduce energy consumption without compromising performance. This feature not only saves on electricity bills but also promotes a more sustainable lifestyle.

In addition to practical features, the Whirlpool GB2SHKLLS00 is designed for user convenience. The exterior is easy to clean, preventing fingerprint smudges and allowing for a maintained polished look. Furthermore, the LED lighting inside illuminates every corner of the appliance, providing better visibility without using excessive energy.

Overall, the Whirlpool GB2SHKLLS00 is a harmonized blend of functional design, advanced technology, and energy efficiency. Whether you're passionate about cooking or simply need a reliable refrigerator to keep your family’s food fresh, this model stands out as a dependable choice in the market. With its array of features tailored to modern living, it fosters an organized kitchen environment that caters to the needs of busy households.
Top Page Image Contents