DataPort V2 connector | QSC Audio SA 1350 specification

Isolated Distributed Line Outputs:

ISA 300Ti, ISA 500Ti, and ISA 800Ti

Models Only

Wiring connections are shown on the back of the chassis. STEREO and PARALLEL connections are shown on the right side of the terminals, and BRIDGE mode is shown on the left side. Carefully note the polarity marks, which are arranged to make Bridge Mode connections easier.

Stereo and Parallel Mode- Connect each 70V/100V cir- cuit to its own channel of the amplifier, as shown on the label, right of terminals. The mode configuration switches, page 6, must be set for Stereo or Parallel mode.

Bridge Mode- Bridge mode configures the amplifier to drive a single 140V/200V audio circuit. See page 6 to set the Bridge Mode switches. Connect a jumper wire between CH1 [0] and CH2 [0] terminals.

Connect the load as shown on the label, left of the termi- nals. Connect only 140V/200V distributed audio circuits in bridged mode. Use Stereo or Parallel mode channels to drive 70V loads.

OUTPUT TERMINAL SAFETY WARNING! Do not touch output terminals while amplifier power is on. Make all connections with amplifier turned off. Risk of hazardous energy!

WARNING! Class 2 wire shall be used. For isolated distributed 140V and 200V, Class 3 wire shall be used.

ATTENTION! BRIDGE MODE CONNECTIONS: Connect a jumper wire between CH1 [0] and CH2 [0] terminals. The isolated output feature requires this jumper connection for bridge mode operation.

DataPort

The DataPort V2 connects to optional QSC accessories and processing devices. DataPort devices provide remote mon- itoring, DSP processing, filter and crossover functions.

Amplifier Standby is not supported.

If using the DataPort for input signals, do not use the Ter- minal Block or XLR inputs.

If the amplifier is being used in a system monitored through a QSC cinema monitor (or other QSC DataPort V2 supporting product) CH1 and CH2 output voltages and AC power status will be reported by the DataPort.

70V/100V Stereo or Parallel connection: Each 70V/ 100V zone connects to its respective channel. Ensure that all speaker connections maintain proper polarity.

140V/200V Bridge connection: Wire each bridged pair to a 140V/200V circuit as shown. Connect a jumper wire between CH1 [0] and CH2 [0] terminals. Check for proper polarity.

DataPort V2 connector.

NOTE! If using the DataPort V2 connection for signal

input, the unused XLR or ter- minal block connectors may be used for daisy chaining the input signal to other amplifiers. However, note the signal will be 10 dB down from the signal applied to the DataPort.

SA 1350 specifications

The QSC Audio SA 1350 is a powerful and versatile amplifier that stands out in the world of professional audio. Designed for a variety of applications, including live sound, installation, and event production, the SA 1350 delivers high performance and reliability, making it a favorite among audio engineers and technicians.

One of the standout features of the SA 1350 is its robust power output. With a continuous power rating of 1,350 watts at 4 ohms, this amplifier is capable of driving large speakers with ease, providing clean and distortion-free sound even at high volumes. The amplifier is designed to handle a wide range of speaker impedances and configurations, allowing users to tailor their audio setup to their specific needs.

The SA 1350 utilizes QSC’s advanced PowerLight 3 technology, which provides a lightweight yet powerful solution for amplifying sound. This technology integrates high-efficiency Class D amplification with a switch-mode power supply, resulting in reduced weight and increased energy efficiency. The amplifier's compact form factor makes it easy to transport and install, without sacrificing performance.

Heat management is another important aspect of the SA 1350’s design. The amplifier features a patented, high-efficiency cooling system that includes advanced thermal protection circuits. This ensures the amplifier remains cool during operation, reducing the risk of overheating and extending the lifespan of the unit.

Connectivity options are versatile, with XLR and 1/4-inch inputs allowing for seamless integration with various audio sources. Additionally, the SA 1350 is equipped with output binding posts and Neutrik Speakon connectors, accommodating different types of speaker cables and setups.

The QSC Audio SA 1350 also emphasizes user-friendly operation. With its intuitive front panel control layout, users can easily adjust gain settings and monitor performance through LED indicators. Its rugged construction is built to withstand the rigors of touring and installations, ensuring reliability in any environment.

In summary, the QSC Audio SA 1350 is a powerful, efficient, and reliable amplifier that combines advanced technology and practical features. Whether used for live sound applications, installations, or events, the SA 1350 consistently delivers exceptional audio performance that meets the demands of professionals in the audio industry. Its blend of power, efficiency, and versatility makes it an indispensable tool for any audio setup.