Whirlpool ETl6JK manual Adjusting the refrigerator shelves, Removing crispers and crisper cover

Adjusting the refrigerator shelves...

To remove the shelf:

1.First, remove food from shelf.

2.Slide shelf straight out to stop.

3.Lift front, slide shelf the rest of the way out.

To replace the shelf:

1.Fit back of shelf on top of guides with wire stops on the bottom of guides.

2.Lift front, slide shelf in until it clears guide stops.

GUIDE

SHELF

.F GUIDE

Removing crispers and crisper cover. . .

To remove the crispers:

1.Slide crisper straight out to stop.

2.Lift the front.

3.Slide the rest of the way out.

4.Replace in reverse order.

To remove fhe cover:

1.Lift front and remove the cover support.

2.Lift out cover by pulling up and out.

To replace the cover:

1.Fit back of cover into notch supports on walls of refrigerator, then lower front into place.

2.Replace cover support with the long tab towards the front. NOTE: If support needs adjustment, turn base right to raise, or left to lower.

Changing the light bulb...

1.Reach behind the control console to find bulb.

2.Remove bulb.

3.Replace with a 40-watt appliance bulb.

Ice cube trays...

(Model Ell6JK)

If cubes are not used, they may shrink. The mov- ing cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.

To remove ice:

1.Hold tray at both ends.

2.Slightly twist.

6