Whirlpool W10312241A Troubleshooting, Changing the Light Bulbs, Refrigerator Operation

Page 10

Changing the Light Bulbs

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the

3. Plug in refrigerator or reconnect power.

bulb with an appliance bulb of the same size, shape, and wattage.

 

1.

Unplug refrigerator or disconnect power.

 

2.

Remove the bulb from behind the control panel in the

 

 

refrigerator or from behind the light shield in the freezer (on

 

 

some models). Replace it with an appliance bulb of the same

 

 

wattage.

 

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.whirlpool.com In Canada, www.whirlpool.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Power cord unplugged? Plug into a grounded 3 prong outlet.

■Is outlet working? Plug in a lamp to see if the outlet is working.

■Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Control(s) on? Make sure the refrigerator control is on. See “Using the Control(s).”

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature control(s) to coldest setting will not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

■Pulsating - fans/compressor adjusting to optimize performance.

■Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator.

■Popping - contraction/expansion of inside walls, especially during initial cool-down.

■Water running/dripping - may be heard when ice melts during defrosting and water runs into the drain pan.

The door will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back in the correct position.

■Crisper cover in the way? Make sure the crisper cover is fully pushed in, so that the back rests on the supports.

The door is difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsRemove the Packaging Clean Before Using Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Tools NeededReverse Doors-Standard Door optional Refrigerator DoorsRemove Doors and Hinges all models CabinetDoors Refrigerator doorReverse Doors-Contour Door optional Replace Doors and Hinges all modelsOptional CONDITION/REASON Adjustment Adjust the DoorsUsing theControls Refrigerator USERefrigerator Care CleaningTo Clean Your Refrigerator Crisper Humidity ControlChanging the Light Bulbs TroubleshootingRefrigerator Operation Temperature is too warm AccessoriesTemperature and Moisture Stainless Steel Cleaner and PolishThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions DinstallationExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement à une canalisation d’eau Achever l’installationRaccordement de la canalisation deau Raccordement au réfrigérateurCaisse Portes du réfrigérateurDémontage Portes et charnières tous les modèles Porte du compartiment de congélationPortes Réinstallation Portes et charnières tous les modèlesPorte du réfrigérateur Étapes finales tous les modèlesFacultatif Ajustement desportes Utilisation des commandesUtilisation DU Réfrigérateur CONDITION/RAISON AjustementNettoyage Entretien DU RéfrigérateurMachine à glaçons Nettoyage de votre réfrigérateurDépannage Remplacement des ampoules d’éclairageFonctionnement du réfrigérateur Température et humidité AccessoiresGlaçons et eau La présente garantie limitée ne couvre pas Garantie LimitéeÉléments Exclus DE LA Garantie W10312241A SP PN W10312242A

W10312241A specifications

The Whirlpool W10312241A is a highly regarded refrigerator water filter that is designed to enhance the quality of drinking water and ice produced by compatible Whirlpool refrigerators. It is well-known for its effective filtration system, which utilizes advanced technologies to ensure that consumers can enjoy clean and fresh-tasting water at all times.

One of the main features of the W10312241A is its ability to reduce a wide range of contaminants, including lead, chlorine, sediment, and other potentially harmful substances commonly found in tap water. This ensures that the water you and your family consume is not only safe but also free from undesirable odors and tastes. The filter is certified to meet industry standards, providing users with peace of mind regarding its performance and reliability.

The W10312241A employs a carbon block filtration technology, which is known for its high efficiency in capturing impurities. This technology allows for a substantial reduction in chloramines and volatile organic compounds (VOCs), further enhancing the quality of the water. Users can rest assured that they are drinking water that is not only clean but also crisp and refreshing.

Installation of the W10312241A filter is straightforward and convenient, designed for easy DIY replacements. Users can quickly replace their old filter without the need for professional assistance, which is a significant advantage for busy households. The filter typically needs replacement every six months or after filtering approximately 200 gallons of water, depending on water quality and usage.

Another notable characteristic of the W10312241A is its compatibility with a variety of Whirlpool refrigerator models, making it a versatile option for those who own these appliances. It also meets a range of safety and quality standards set by relevant health organizations, ensuring that it delivers safe and clean drinking water.

Overall, the Whirlpool W10312241A water filter combines effective filtration technology with user-friendly design, making it an excellent choice for families seeking to improve their water quality. With its robust features and dependable performance, this filter stands out as a reliable option for promoting a healthier lifestyle through cleaner drinking water.
Top Page Image Contents