Whirlpool W10312241A installation instructions Installation Instructions, Unpack the Refrigerator

Page 2

IMPORTANT SAFETY INSTRUCTIONS

WARNING:To reduce the risk of fire, electric shock, or injury to persons when using the refrigerator, follow basic precautions, including the following:

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Disconnect power before servicing.

Replace all parts and panels before operating.

Remove doors from your old refrigerator.

Use nonflammable cleaner.

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Use two or more people to move and install refrigerator.

Disconnect power before installing ice maker (on ice maker kit ready models only).

SAVE THESE INSTRUCTIONS

Proper Disposal of Your Old Refrigerator

WARNING

Suffocation Hazard

Remove doors from your old refrigerator.

Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous

even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer:

Take off the doors.

Leave the shelves in place so that children may not easily climb inside.

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the refrigerator straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Remove the Packaging

Clean Before Using

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

IMPORTANT: Do not remove the white foam air return insert from behind the control panel on the ceiling of the refrigerator. If the insert is removed, ice may migrate down from the freezer and cause icicles to form.

After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care.”

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.

2

Image 2
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsRemove the Packaging Clean Before Using Before You Throw Away Your Old Refrigerator or FreezerRecommended Grounding Method LocationRequirementsElectrical Requirements Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Tools NeededReverse Doors-Standard Door optional Refrigerator DoorsRemove Doors and Hinges all models CabinetDoors Refrigerator doorReverse Doors-Contour Door optional Replace Doors and Hinges all modelsOptional CONDITION/REASON Adjustment Adjust the DoorsUsing theControls Refrigerator USERefrigerator Care CleaningTo Clean Your Refrigerator Crisper Humidity ControlRefrigerator Operation TroubleshootingChanging the Light Bulbs Temperature is too warm AccessoriesTemperature and Moisture Stainless Steel Cleaner and PolishThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions DinstallationExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement à une canalisation d’eau Achever l’installationRaccordement de la canalisation deau Raccordement au réfrigérateurCaisse Portes du réfrigérateurDémontage Portes et charnières tous les modèles Porte du compartiment de congélationPortes Réinstallation Portes et charnières tous les modèlesPorte du réfrigérateur Étapes finales tous les modèlesFacultatif Ajustement desportes Utilisation des commandesUtilisation DU Réfrigérateur CONDITION/RAISON AjustementNettoyage Entretien DU RéfrigérateurMachine à glaçons Nettoyage de votre réfrigérateurFonctionnement du réfrigérateur Remplacement des ampoules d’éclairageDépannage Glaçons et eau AccessoiresTempérature et humidité La présente garantie limitée ne couvre pas Garantie LimitéeÉléments Exclus DE LA Garantie W10312241A SP PN W10312242A

W10312241A specifications

The Whirlpool W10312241A is a highly regarded refrigerator water filter that is designed to enhance the quality of drinking water and ice produced by compatible Whirlpool refrigerators. It is well-known for its effective filtration system, which utilizes advanced technologies to ensure that consumers can enjoy clean and fresh-tasting water at all times.

One of the main features of the W10312241A is its ability to reduce a wide range of contaminants, including lead, chlorine, sediment, and other potentially harmful substances commonly found in tap water. This ensures that the water you and your family consume is not only safe but also free from undesirable odors and tastes. The filter is certified to meet industry standards, providing users with peace of mind regarding its performance and reliability.

The W10312241A employs a carbon block filtration technology, which is known for its high efficiency in capturing impurities. This technology allows for a substantial reduction in chloramines and volatile organic compounds (VOCs), further enhancing the quality of the water. Users can rest assured that they are drinking water that is not only clean but also crisp and refreshing.

Installation of the W10312241A filter is straightforward and convenient, designed for easy DIY replacements. Users can quickly replace their old filter without the need for professional assistance, which is a significant advantage for busy households. The filter typically needs replacement every six months or after filtering approximately 200 gallons of water, depending on water quality and usage.

Another notable characteristic of the W10312241A is its compatibility with a variety of Whirlpool refrigerator models, making it a versatile option for those who own these appliances. It also meets a range of safety and quality standards set by relevant health organizations, ensuring that it delivers safe and clean drinking water.

Overall, the Whirlpool W10312241A water filter combines effective filtration technology with user-friendly design, making it an excellent choice for families seeking to improve their water quality. With its robust features and dependable performance, this filter stands out as a reliable option for promoting a healthier lifestyle through cleaner drinking water.