Whirlpool W10312241A Water Supply Requirements, Connect the Water Supply, Tools Needed

Page 4

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

■Make sure it is a cold water pipe.

■Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Remove the Packaging Clean Before UsingUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Water Supply Requirements Connect the Water SupplyReverse Osmosis Water Supply Tools NeededRefrigerator Doors Remove Doors and Hinges all modelsReverse Doors-Standard Door optional CabinetRefrigerator door Reverse Doors-Contour Door optionalDoors Replace Doors and Hinges all modelsOptional Adjust the Doors Using theControlsCONDITION/REASON Adjustment Refrigerator USECleaning To Clean Your RefrigeratorRefrigerator Care Crisper Humidity ControlChanging the Light Bulbs TroubleshootingRefrigerator Operation Accessories Temperature and MoistureTemperature is too warm Stainless Steel Cleaner and PolishLimited Warranty Items Excluded from WarrantyThis limited warranty does not cover Disclaimer of Implied WarrantiesSécurité DU Réfrigérateur RéfrigérateurInstructions Dinstallation Exigences demplacementDéballagedu réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurMéthode recommandée de mise à la terre SpécificationsélectriquesSpécifications del’alimentationen eau Alimentation en eau par osmose inverseAchever l’installation Raccordement de la canalisation deauRaccordement à une canalisation d’eau Raccordement au réfrigérateurPortes du réfrigérateur Démontage Portes et charnières tous les modèlesCaisse Porte du compartiment de congélationRéinstallation Portes et charnières tous les modèles Porte du réfrigérateurPortes Étapes finales tous les modèlesFacultatif Utilisation des commandes Utilisation DU RéfrigérateurAjustement desportes CONDITION/RAISON AjustementEntretien DU Réfrigérateur Machine à glaçonsNettoyage Nettoyage de votre réfrigérateurDépannage Remplacement des ampoules d’éclairageFonctionnement du réfrigérateur Température et humidité AccessoiresGlaçons et eau Garantie Limitée Éléments Exclus DE LA GarantieLa présente garantie limitée ne couvre pas W10312241A SP PN W10312242A

W10312241A specifications

The Whirlpool W10312241A is a highly regarded refrigerator water filter that is designed to enhance the quality of drinking water and ice produced by compatible Whirlpool refrigerators. It is well-known for its effective filtration system, which utilizes advanced technologies to ensure that consumers can enjoy clean and fresh-tasting water at all times.

One of the main features of the W10312241A is its ability to reduce a wide range of contaminants, including lead, chlorine, sediment, and other potentially harmful substances commonly found in tap water. This ensures that the water you and your family consume is not only safe but also free from undesirable odors and tastes. The filter is certified to meet industry standards, providing users with peace of mind regarding its performance and reliability.

The W10312241A employs a carbon block filtration technology, which is known for its high efficiency in capturing impurities. This technology allows for a substantial reduction in chloramines and volatile organic compounds (VOCs), further enhancing the quality of the water. Users can rest assured that they are drinking water that is not only clean but also crisp and refreshing.

Installation of the W10312241A filter is straightforward and convenient, designed for easy DIY replacements. Users can quickly replace their old filter without the need for professional assistance, which is a significant advantage for busy households. The filter typically needs replacement every six months or after filtering approximately 200 gallons of water, depending on water quality and usage.

Another notable characteristic of the W10312241A is its compatibility with a variety of Whirlpool refrigerator models, making it a versatile option for those who own these appliances. It also meets a range of safety and quality standards set by relevant health organizations, ensuring that it delivers safe and clean drinking water.

Overall, the Whirlpool W10312241A water filter combines effective filtration technology with user-friendly design, making it an excellent choice for families seeking to improve their water quality. With its robust features and dependable performance, this filter stands out as a reliable option for promoting a healthier lifestyle through cleaner drinking water.
Top Page Image Contents