Whirlpool W10312241A Accessories, Temperature and Moisture, Iceand Water, Temperature is too warm

Page 11

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Control(s) set correctly for the surrounding conditions? Adjust the control(s) a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully closed.

Iceand Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

ACCESSORIES

To order stainless steel cleaner, call 1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

In Canada, Order Part #31462B

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsRemove the Packaging Clean Before Using Unpack the RefrigeratorRecommended Grounding Method LocationRequirementsElectrical Requirements Tools Needed Water Supply RequirementsConnect the Water Supply Reverse Osmosis Water SupplyCabinet Refrigerator DoorsRemove Doors and Hinges all models Reverse Doors-Standard Door optionalReplace Doors and Hinges all models Refrigerator doorReverse Doors-Contour Door optional DoorsOptional Refrigerator USE Adjust the DoorsUsing theControls CONDITION/REASON AdjustmentCrisper Humidity Control CleaningTo Clean Your Refrigerator Refrigerator CareRefrigerator Operation TroubleshootingChanging the Light Bulbs Stainless Steel Cleaner and Polish AccessoriesTemperature and Moisture Temperature is too warmDisclaimer of Implied Warranties Limited WarrantyItems Excluded from Warranty This limited warranty does not coverRéfrigérateur Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions DinstallationExigences demplacement Déballagedu réfrigérateurAlimentation en eau par osmose inverse Méthode recommandée de mise à la terreSpécificationsélectriques Spécifications del’alimentationen eauRaccordement au réfrigérateur Achever l’installationRaccordement de la canalisation deau Raccordement à une canalisation d’eauPorte du compartiment de congélation Portes du réfrigérateurDémontage Portes et charnières tous les modèles CaisseÉtapes finales tous les modèles Réinstallation Portes et charnières tous les modèlesPorte du réfrigérateur PortesFacultatif CONDITION/RAISON Ajustement Utilisation des commandesUtilisation DU Réfrigérateur Ajustement desportesNettoyage de votre réfrigérateur Entretien DU RéfrigérateurMachine à glaçons NettoyageFonctionnement du réfrigérateur Remplacement des ampoules d’éclairageDépannage Glaçons et eau AccessoiresTempérature et humidité W10312241A SP PN W10312242A Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pas

W10312241A specifications

The Whirlpool W10312241A is a highly regarded refrigerator water filter that is designed to enhance the quality of drinking water and ice produced by compatible Whirlpool refrigerators. It is well-known for its effective filtration system, which utilizes advanced technologies to ensure that consumers can enjoy clean and fresh-tasting water at all times.

One of the main features of the W10312241A is its ability to reduce a wide range of contaminants, including lead, chlorine, sediment, and other potentially harmful substances commonly found in tap water. This ensures that the water you and your family consume is not only safe but also free from undesirable odors and tastes. The filter is certified to meet industry standards, providing users with peace of mind regarding its performance and reliability.

The W10312241A employs a carbon block filtration technology, which is known for its high efficiency in capturing impurities. This technology allows for a substantial reduction in chloramines and volatile organic compounds (VOCs), further enhancing the quality of the water. Users can rest assured that they are drinking water that is not only clean but also crisp and refreshing.

Installation of the W10312241A filter is straightforward and convenient, designed for easy DIY replacements. Users can quickly replace their old filter without the need for professional assistance, which is a significant advantage for busy households. The filter typically needs replacement every six months or after filtering approximately 200 gallons of water, depending on water quality and usage.

Another notable characteristic of the W10312241A is its compatibility with a variety of Whirlpool refrigerator models, making it a versatile option for those who own these appliances. It also meets a range of safety and quality standards set by relevant health organizations, ensuring that it delivers safe and clean drinking water.

Overall, the Whirlpool W10312241A water filter combines effective filtration technology with user-friendly design, making it an excellent choice for families seeking to improve their water quality. With its robust features and dependable performance, this filter stands out as a reliable option for promoting a healthier lifestyle through cleaner drinking water.
Top Page Image Contents