Whirlpool AKT464 Troubleshooting Guide, Cleaning the HOB Surface, Cleaning the HOB Parts

Page 3

TROUBLESHOOTING GUIDE

If the hob will not operate correctly, before calling the After-Sales Service, refer to the Troubleshooting Guide to determine the problem.

1.The burner fails to ignite or the flame is not even Check that:

The gas or electrical supplies are not shut off and especially that the gas supply tap is open.

The gas cylinder (liquid gas) is not empty.

The burner openings are not clogged.

The plug end is not dirty.

All the burner parts have been positioned correctly.

There are no draughts near the hob.

2.The burner does not stay lit Check that:

When lighting the burner, the knob has been pressed for enough time to activate the protection device.

The burner openings are not clogged near the thermocouple.

The end of the safety device is not dirty.

The minimum gas setting is correct (see relevant paragraph).

3.The containers are not stable Check that:

The bottom of the container is perfectly flat

The container is centered on the burner.

The grids have not been exchanged or positioned incorrectly.

If after the above checks the fault still occurs, get in touch with the nearest After Sales Service.

CLEANING THE HOB SURFACE

WARNING

Disconnect power before servicing.

 

 

 

All the enamelled and glass parts should be cleaned with warm water and neutral solution.

Stainless steel surfaces may be stained by calcareous water or aggressive detergents if left in contact for too long. Any food spills (water, sauce, coffee, etc.) should be wiped away before they dry.

Clean with warm water and neutral detergent, and then dry with a soft cloth or chamois. Remove baked-on dirt with specific cleaners for stainless steel surfaces.

NOTE: clean stainless steel only with soft cloth or sponge.

Do not use abrasive or corrosive products, chlorine-based cleaners or pan scourers.

Do not use steam cleaning appliances.

Do not use flammable products.

Do not leave acid or alkaline substances, such as vinegar, mustard, salt, sugar or lemon juice on the hob.

CLEANING THE HOB PARTS

Grids, burner caps and burners can be removed to be cleaned.

Clean them by hand with warm water and non-abrasive detergent, removing any food residues and checking that none of the burner openings is clogged.

Rinse and dry

Refit burners and burner caps correctly in the respective housings.

When replacing the grids, make sure that the panstand area is aligned with the burner.

Models equipped with electrical ignition plugs and safety device require thorough cleaning of the plug end in order to ensure correct operation. Check these items frequently, and if necessary, clean them with a damp cloth. Any baked-on food should be removed with a toothpick or needle.

NOTE: to avoid damaging the electric ignition device, do not use it when the burners are not in their housing.

DECLARATION OF CONFORMITY

This hob has been designed, constructed and marketed in compliance with:

-safety requirements of “Gas” Directive 2009/142/EC (ex: EEC 90/396);

-safety objectives of the “Low Voltage” Directive 2006/95/CE (which replaces 73/23/CEE and subsequent amendments);

-protection requirements of EEC Directive “EMC” 2004/108/EC.

This hob is suitable for contact with foodstuffs and complies with EEC (CE) Regulation n. 1935/2004.

SAFEGUARDING THE ENVIRONMENT

Disposal of packing material

The packing material is 100% recyclable and is marked with the recycle symbol (). The various parts of the packing must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.

Scrapping the product

-This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

-By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

-The symbol on the product or on the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic equipment.

PRODUCT DESCRIPTION

1.Removable panstand grids

2.Auxiliary burner

3.Semi-rapid burner

4.Semi-rapid burner

5.Ultra-rapid burner

6. Auxiliary burner control knob

7. Semi-rapid burner control knob

8. Semi-rapid burner control knob

9. Ultra-rapid burner control knob

Symbols

Tap closed

Maximum flame

Minimum flame

Image 3
Contents GAS Connection InstallationTechnical Information for the Installer BUILT-IN GAS HOBAFTER-SALES Service AssemblyAdjustment to Different Types of GAS Adjusting Minimum GAS Setting of TapsSafeguarding the Environment Troubleshooting GuideCleaning the HOB Surface Cleaning the HOB PartsHOW to USE the HOB Pratical Advice for Using the Burners

AKT464 specifications

The Whirlpool AKT464 is a versatile built-in induction cooktop that embodies the perfect blend of functionality, style, and cutting-edge technology. This appliance is designed for modern kitchens, providing both efficiency and aesthetic appeal.

One of the standout features of the AKT464 is its induction cooking technology. This allows for rapid heating and precise temperature control, ensuring that cooking is not only quicker but also more energy-efficient compared to traditional gas or electric cooktops. The induction technology works by producing an electromagnetic field that directly heats the cookware, giving instant response as soon as the temperature settings are adjusted.

The AKT464 boasts four cooking zones, each equipped with individual controls. This flexibility allows users to prepare multiple dishes simultaneously, enhancing workflow in the kitchen. The cooktop also features a booster function for each zone, enabling sudden bursts of high heat, which is ideal for boiling water quickly or achieving an excellent sear on meats.

Safety is paramount in the design of this cooktop. It incorporates features such as residual heat indicators that alert users when the surfaces are still hot after cooking. Additionally, the child-lock function prevents accidental activation, making the appliance safer for households with young children.

The sleek glass-ceramic surface of the Whirlpool AKT464 not only enhances its appearance but also simplifies cleaning. Spills and splatters can be wiped away easily, as the flat surface prevents food from getting trapped in seams or between burners.

Users will also appreciate the intuitive touch controls, which make it easy to select heat levels and navigation through various settings. The digital display provides clear feedback, allowing for effortless operation.

In summary, the Whirlpool AKT464 is an innovative induction cooktop that brings together efficiency, safety, and user-friendly features. Its robust performance, easy maintenance, and stylish appearance make it an ideal choice for contemporary kitchens, providing a seamless cooking experience that caters to both novice home cooks and seasoned chefs alike. Whether preparing simple weeknight meals or elaborate dinner parties, this appliance is designed to meet all cooking needs with speed and precision.