Lexicon BD-30 manual Useful Notes, Troubleshooting, Reference, Symptom Possible Cause Solution

References Lexicon

Useful Notes

•In order to prolong the service life of your player, it is recommended to wait at least 30 seconds before you turn it on again after switching it off.

•Remove disc and turn power off after operation.

•Some functions of the player may not be applicable to certain discs.

•Some discs with special features may not be fully supported by the player. This is not a malfunction of the unit.

•In case of player malfunction, please turn it off, wait for 30 seconds and turn it back on. If the problem still exists, please follow the troubleshooting instructions or contact a Lexicon service center.

Troubleshooting

Use this chart to resolve general operational problems. If there are any problems that you cannot resolve, please contact your Lexicon service center.

			Reference
Symptom	Possible Cause	Solution	Page
No sound	Audio cable is not properly connected	Check audio cable, and then reconnect if necessary.	13 - 19
	Mute is activated	Press the MUTE button to cancel the mute.	30
	Volume is too low	Press the VOL + button to increase the volume to 100.	30
	SACD is played and the audio connection is coaxial or optical	This is not supported due to copyright restrictions of SACD.	18, 53
	digital audio	Please use the analog or HDMI audio output. Alternatively, you
		may set SACD Priority to CD mode and the player will play the CD
		layer.
	DVD-Audio is played and the audio connection is coaxial or	This is not supported due to copyright restrictions of SACD.	18, 53
	optical digital audio	Please use the analog or HDMI audio output. Alternatively, you
		may switch to the DVD-Video playback mode.
No picture	Video cable is not properly connected	Check video cable; reconnect if necessary.	13 - 14
	TV input is not correctly selected	Select the input to which the player is connected.
	“Pure” mode engaged	Check the “PURE” display on the front panel, and press the PURE	44
		button to cancel this mode.
	Video output format is not support by the TV	Select a proper output resolution that is supported by your TV.	35
	Video system is not supported by the TV	When playback is completely stopped, press the P/N button or set	35, 54
		the correct TV System in the Setup Menu.

74