Setup Menu Options | |
|
|
•On – The video screen will be split in half. The left side demonstrates the result of the VRS™ video processing, and the right side shows video without the help of VRS video processing.
•Off – Normal viewing mode.
•A/V Sync – To add a delay to the HDMI audio output. If you experience an audio/video synchronization problem, you may use this option to add a slight delay to the audio so it is synchronized to the video.
•Use the UP/DOWN ARROW buttons to highlight the A/V Sync menu item. Press the ENTER button.
•Press the LEFT/RIGHT ARROW buttons to adjust delay. The audio delay can be adjusted in 10ms steps.
•Press the ENTER button to confirm the new A/V Sync setting and return to the Audio Processing Setup Menu.
9.Screen Saver: To turn on/off the screen saver function. The screen saver is designed to minimize
•On – After about 3 minutes of inactivity, the player will show an animated Lexicon logo moving on a black background. This allows most areas of the screen to rest and gives all areas an equal opportunity to refresh.
•Off – The screen saver will not be activated. Use this option if your TV does not have a
•Energy Saver – Video output will be turned off after
3 minutes of inactivity. Many projectors and LCD TVs will go into a standby or sleep mode and turn off their projection lamp or LCD backlight lamp, thus saving energy and prolonging the lamp life. When you press any button on the Lexicon remote control or the player’s front panel, the screen saver will be cancelled and video output will be restored. If your TV is already in standby or sleep mode, you may need to wake up the TV by pressing a button on its remote or control panel.
Picture Adjustment
Picture Adjustment is a special section of the Video Setup menu. It allows you to
–“Picture Adjustment”. The Setup Menu will be replaced by the Picture Adjustment menu:
Picture Mode |
|
| Normal |
|
Brightness | 0 | +16 |
| |
Contrast | 0 | +16 |
| |
Hue (Analog) | 0 | +16 |
| |
Saturation | 0 | +16 |
| |
Detail Enhancement | 0 | +16 |
| |
Edge Enhancement | 0 | +16 |
| |
Noise Reduction | 0 | 0 | +8 |
|
Y/C Delay | 0 | +16 |
| |
Border Level | 0 | 0 | +16 |
|
| Exit |
|
|
|
|
|
|
|
|
To change a picture adjustment parameter, use the UP/DOWN ARROW buttons to highlight the parameter, and use the LEFT/ RIGHT ARROW buttons to change its value.
To aid in the adjustment of picture control parameters, the picture adjustment menu will be reduced to only show the parameter being adjusted once you press the LEFT/RIGHT ARROW buttons. The reduced menu will be positioned near the bottom of
the screen.
|
|
|
|
|
Brightness | 0 | +16 |
| |
|
|
|
|
|
|
|
|
|
|
57
