Looking Inside
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:
1Remove shelf by pulling forward to stop position.
2Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this procedure.
SpillFreeTM glass shelves (some models) catch and hold accidental spills. In some models, the SpillFreeTM shelves slide out for easy access to food and for fast cleaning. The shelves slide out independently of the cantilever brackets. Just pull the front of the shelf forward. The shelf can be extended as far as the stopper will allow but it is not removable from the cantilever bracket.
Sliding Wire Shelf
Sliding Glass Shelf
Cantilever Fixed Glass Shelf
DOOR STORAGE
Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans. Frequently used items can be quickly selected.
Some models have door racks or bins that can accommodate
The dairy compartment, which is warmer than the general food storage section, is intended for short term storage of cheese, spreads, or butter.
To adjust cantilever shelves:
NOTE: Cantilever shelves are supported at the back of the refrigerator. Cantilever shelves are available in either glass or wire.
1Lift front edge up.
2Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position.
Door Rack
10
