Stardance Natural Vent Gas Heater
Operation
The Stardance is operated with the operable door front plate in place with the doors open or closed. To open the front doors, insert the handle into the door latch stub and turn it to the left and up. (Fig. 22) When not in use, the handle may be stored in the handle holder on the right side of the rear shroud. (Fig. 23)
Clockwise |
to Open |
Counterclockwise |
to Close |
ST624 |
Fig. 22 To open the front doors, turn handle clockwise. |
Pilot As- sembly
ST476
Fig. 24 Pilot Assembly location.
Flame & Temperature Adjustment
For stoves equipped with HI/LO valves, flame adjust- ment is accomplished by rotating the HI/LO adjustment knob located near the center of the gas control valve. (Fig. 25)
Handle
Holder
ST624
Fig. 23 When not in use, store handle in the handle holder.
Your First Fire
Read these instructions carefully and familiarize yourself with the burner controls shown in Figure 27. Locate the pilot assembly, Figure 24. Follow the lighting instructions on Page 14 exactly.
During the first fire, it is not unusual to smell some odor associated with new logs, paint and metal being heated. Odors should dissipate within an hour or so, however, you can open a window to provide fresh air to
alleviate the condition.
Pilot and Burner Inspection
Each time you light your heater check that the pilot flame and burner flame patterns are as shown in Figure
26.If flame patterns are incorrect, turn the heater off. Contact your dealer or a qualified gas technician for as- sistance. Do not operate the heater until the pilot flame is correct.
Follow regular maintenance procedures as described on Page 19.
Turn |
|
|
|
counterclockwise | �� | �� | Turn clockwise |
to decrease |
| to increase | |
|
| ||
flame height |
|
| flame height |
Fig. 25 Flame adjustment knob for Honeywell valve.
Flame Characteristics
It is important to periodically perform a visual check of the pilot and the burner flames. Compare them to Figure 26. If any of the flames appear abnormal, call a service person.
CO105c
Red Glow
LG143
Fig. 26 Correct pilot and burner flame pattern.
20007067 | 13 |
