Getting Started

Lexicon

 

 

For the component output, the following output resolutions are available: 1080i, 720p, 480p/576p and 480i/576i. Please refer to the specification of your TV to find the best resolution to use.

Easy Setup

Auto

Step: 3/6

1080p

Confirm Output Resolution

Choose the output resolution which best matches 1080i your TV.

15s The output resolution has been changed.

720p

Chang

Select OK to save the new setting. Select

15 sec

 

480p/576p

Cancel to rollback to the previous output

rollbac

resolution.

480i/576i

 

 

Source Direct

Previous

 

Next

Press the UP/DOWN ARROW buttons to select the desired output resolution, then press the ENTER button. The player will apply the selected output resolution and ask you to confirm the selection.

If your TV supports the selected resolution, you will see a dialog box with a countdown clock. Use the LEFT ARROW button to highlight the “OK” option and press the ENTER button to save the resolution setting. If your TV does not support the selected resolution, you may see a black screen or an error message. In this case please wait for 15 seconds and the Easy Setup screen will reappear. Select a different resolution that your TV can support.

Note

In case you are not able to get a picture using the HDMI or component output, please connect the player to the TV using the composite video output, and then use the Setup Menu to adjust the player settings.

Video up-conversion over the component output is only available for unencrypted discs such as home video and consumer-created contents. Most commercially pressed DVD discs are CSS-encrypted and will be limited to 480i/480p resolution. This restriction applies to the component output only. The HDMI output is protected with HDCP and has no such restriction.

Determine the Display Aspect Ratio

Standard Definition, or 4:3 TV

Wide Screen, or 16:9 TV

The aspect ratio is the proportional ratio of a TV screen’s width and height. Older television sets generally have a 4:3 aspect ratio

the width is 4/3 (or 1.33) times the height. Newer wide screen television sets have a 16:9 aspect ratio – the width is 16/9 (or 1.78) times the height. For best performance, the video output of your player needs to match the screen aspect ratio of your TV. Since almost all Blu-ray Discs and many DVD discs are released in the wide screen format, it is highly recommended that you use a wide screen TV with the player.

The Aspect Ratio selections are 4:3 Letterbox, 4:3 Pan & Scan, 16:9 Wide, and 16:9 Wide/Auto. Depending on your selection and the video format recorded on the discs, image appearance on the TV screen can be one of the following:

24

Page 28
Image 28
Lexicon BD-30 manual Getting Started, Determine the Display Aspect Ratio