Lexicon BD-30 manual Other Audio Processing Settings, Unsupported Configuration Settings

Models: BD-30

1 92
Download 92 pages 52.09 Kb
Page 71
Image 71

BD-30 Blu-ray Disc Player

Setup Menu Options

 

 

Unsupported Configuration

Settings:

Front Speakers – 12ft

Center Speaker – 12ft

Subwoofer – 12ft

Left Surround – 12ft

Right Surround – 12ft

Left Surround Back – 12ft

Right Surround Back – 12ft

3.Trim Level: The speaker trim level parameter sets the volume of each individual channel. Channel trim is generally not required since most A/V receivers and processors have the capability to adjust channel trim and compensate for speaker sensitivity differences. However, if your receiver or processor does not have such functions (many receivers do not support

channel trim for their multi-channel analog inputs), you may adjust channel trim through the player. For most accurate results, it is recommended that you use test tones from a calibration disc, such as Digital Video Essentials HD Basics, and a SPL (Sound Pressure Level) meter. The trim level can be set to +/- 10dB in 0.5dB increments.

Other Audio Processing Settings

In addition to Speaker Configuration, two other audio processing settings are available:

1.Dolby Pro Logic II: Dolby Pro Logic II processing can expand 2-channel source audio into full 5-channel surround sound. Note: Pro Logic II functionality is effective only when Speaker Configuration > Down Mix Mode is set to “5.1Ch” or “7.1Ch”. The available options are:

Music – The surround experience is tailored for multi- channel music playback.

Movie – Emphasis is given to the center channel as two- channel audio is decoded and played back into your 5.1 system.

Off – No Dolby Pro Logic II processing.

2.Dynamic Range Control: To set the Dynamic Range Compression (DRC). DRC can smooth out the sonic peaks and valleys common with wide-range digital audio. Enabling DRC may make low-level audio more audible during low-level listening. Turning off DRC restores the sonic energy present in the original recording. The available options are:

Auto – Play at the dynamic range specified by the disc. This option applies to Blu-ray Discs only. For other disc types no dynamic range compression is applied.

On – Turn on dynamic range compression.

Off – Turn off dynamic range compression.

67

Page 71
Image 71
Lexicon BD-30 manual Other Audio Processing Settings, Unsupported Configuration Settings