Gas Supply Requirements, Gas Supply Line

Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149 - latest edition.

IMPORTANT: Leak testing of the cooktop must be conducted according to the manufacturer’s instructions.

Gas Supply Line

■Provide a gas supply line of ³⁄₄" (1.9 cm) rigid pipe to the cooktop location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size should be ½" minimum. Usually, LP gas suppliers determine the size and materials used in the system.

Flexible metal appliance connector:

■If local codes permit, use a ¹⁄₂" or ³⁄₄" I.D. flexible stainless steel tubing gas connector, designed by CSA to connect the cooktop to the rigid gas supply line.

■A ½" male pipe thread is needed for connection to the female pipe threads of the inlet to the cooktop pressure regulator.

■Do not kink or damage the flexible metal tubing when moving the cooktop.

Rigid pipe connection:

The rigid pipe connection requires a combination of pipe fittings to obtain an in-line connection to the cooktop. The rigid pipe must be level with the cooktop connection. All strains must be removed from the supply and fuel lines so cooktop will be level and in line.

Type of Gas

Natural Gas:

This cooktop is design-certified by CSA International for use with Natural gas or, after proper conversion, for use with LP gas.

■This cooktop is factory set for use with Natural gas. If converting to LP gas, see the following “LP Gas Conversion” section. The model/serial rating plate located on the underside of the cooktop base has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier.

LP Gas Conversion:

Conversion must be done by a qualified service technician.

No attempt shall be made to convert the cooktop from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. See the Gas Conversion instructions provided in the package containing literature.

■Must include a shutoff valve:

The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the cooktop opening, such as an adjacent cabinet. It should be in a location that allows ease of opening and closing. Do not block access to shutoff valve. The valve is for turning on or shutting off gas to the cooktop.

A. Gas supply line

B. Shutoff valve “open” position

C. To cooktop

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

W10526085A specifications

The Whirlpool W10526085A is a premium refrigerator accessory designed to enhance the functionality and efficiency of Whirlpool refrigerators. This innovative replacement filter is engineered to deliver crisp, clean water and ice for the ultimate refreshment experience. With a focus on convenience and aesthetic appeal, it is a must-have component for maintaining high standards of hygiene and quality in your kitchen.

One of the standout features of the W10526085A is its advanced filtration technology. This filter utilizes activated carbon and other specialized materials to remove contaminants and impurities from water, ensuring that the drinking and cooking supply is free from chlorine, lead, and other harmful substances. By effectively reducing these impurities, the filter helps to enhance the taste and clarity of water and ice, making every sip more enjoyable.

Installation of the W10526085A is straightforward and user-friendly. Designed for compatibility with a range of Whirlpool refrigerator models, it can be easily replaced without the need for professional assistance. Simply follow the provided instructions to ensure proper alignment and secure placement, promoting optimal performance right from the start.

Another noteworthy characteristic of this filter is its exceptional filtration life. The W10526085A has a lifespan of up to six months, depending on usage and water quality. Regular replacement is essential to maintain the effectiveness of the filtration system and ensure that your water stays fresh. To help users keep track of replacement schedules, many Whirlpool refrigerators incorporate a filter change indicator, serving as an added convenience.

The W10526085A is also designed with eco-friendliness in mind. By reducing plastic waste associated with bottled water, this filter represents a sustainable choice for households committed to reducing their environmental impact. Moreover, the materials used in manufacturing the filter are often recyclable, further contributing to its green credentials.

In summary, the Whirlpool W10526085A is more than just a refrigerator accessory; it's a vital component for delivering pure, high-quality water and ice. Its advanced filtration capabilities, ease of installation, and commitment to sustainability make it a valuable addition to any Whirlpool refrigerator. By choosing this filter, you’re not only prioritizing health and safety but also enhancing your kitchen's overall functionality.