Complete Connection

2.Connect the flexible stainless steel connector to the pressure regulator using a ½" male pipe thread adapter and nipple.

A combination of pipe fittings must be used to connect the cooktop to the existing gas line. Shown following is a typical connection. Your connection may be different, according to the supply line type, size and location.

3.Install the pressure regulator with the arrow pointing up toward the bottom of the cooktop base and in a position where you can reach the regulator cap.

A. Access cap

B. Rear of cooktop

C. Gas pressure regulator

D. Up arrow. Regulator must be installed with arrow pointing up to cooktop bottom.

IMPORTANT: All connections must be wrench-tightened. Do not make connections to the gas regulator too tight. Making the connections too tight may crack the regulator and cause a gas leak. Do not allow the regulator to turn on the pipe when tightening fittings.

Use only pipe-joint compound made for use with Natural and LP gas.

Do not use TEFLON® tape. You will need to determine the fittings required depending on your installation.

1.Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

A. Closed valve

B. Open valve

2.Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found.

3.Remove surface burner caps and grates from parts package. Align notches in burner caps with pins in burner base. Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light.

Place burner grates over burners and caps.

A. Igniter electrode

B. Burner cap

C. Burner base

Typical flexible connection

1.Apply pipe-joint compound made for use with LP gas to the smaller thread ends of the flexible connector adapters (see G in the following illustration).

2.Attach 1 adapter and nipple to the gas pressure regulator and the other adapter and nipple to the gas shutoff valve. Tighten both adapters and nipples.

3.Use a ¹⁵⁄₁₆" combination wrench and pliers to attach the flexible connector to the adapters. Check that connector is not kinked.

A. ³⁄₈" nipple

E. Gas pressure regulator

B. ³⁄₈" adapter

F. ½" adapter

C. Flexible connector

G. Use pipe-joint compound.

D. ½" nipple

H. Manual gas shutoff valve

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug into a grounded 3 prong outlet.

W10526085A specifications

The Whirlpool W10526085A is a premium refrigerator accessory designed to enhance the functionality and efficiency of Whirlpool refrigerators. This innovative replacement filter is engineered to deliver crisp, clean water and ice for the ultimate refreshment experience. With a focus on convenience and aesthetic appeal, it is a must-have component for maintaining high standards of hygiene and quality in your kitchen.

One of the standout features of the W10526085A is its advanced filtration technology. This filter utilizes activated carbon and other specialized materials to remove contaminants and impurities from water, ensuring that the drinking and cooking supply is free from chlorine, lead, and other harmful substances. By effectively reducing these impurities, the filter helps to enhance the taste and clarity of water and ice, making every sip more enjoyable.

Installation of the W10526085A is straightforward and user-friendly. Designed for compatibility with a range of Whirlpool refrigerator models, it can be easily replaced without the need for professional assistance. Simply follow the provided instructions to ensure proper alignment and secure placement, promoting optimal performance right from the start.

Another noteworthy characteristic of this filter is its exceptional filtration life. The W10526085A has a lifespan of up to six months, depending on usage and water quality. Regular replacement is essential to maintain the effectiveness of the filtration system and ensure that your water stays fresh. To help users keep track of replacement schedules, many Whirlpool refrigerators incorporate a filter change indicator, serving as an added convenience.

The W10526085A is also designed with eco-friendliness in mind. By reducing plastic waste associated with bottled water, this filter represents a sustainable choice for households committed to reducing their environmental impact. Moreover, the materials used in manufacturing the filter are often recyclable, further contributing to its green credentials.

In summary, the Whirlpool W10526085A is more than just a refrigerator accessory; it's a vital component for delivering pure, high-quality water and ice. Its advanced filtration capabilities, ease of installation, and commitment to sustainability make it a valuable addition to any Whirlpool refrigerator. By choosing this filter, you’re not only prioritizing health and safety but also enhancing your kitchen's overall functionality.