Install Cooktop

Gas Pressure Regulator

The gas pressure regulator supplied with this cooktop must be used. The inlet pressure to the regulator should be as follows for proper operation:

Natural Gas:

Minimum pressure: 5" (12.7 cm) WCP

Maximum pressure: 7" to 14" (17.8 cm to 35.5 cm) WCP

LP Gas:

Minimum pressure: 11" (27.9 cm) WCP

Maximum pressure: 14" (35.5 cm) WCP

Contact local gas supplier if you are not sure about the inlet pressure.

Burner Input Requirements

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m) above sea level (not applicable for Canada).

For elevations above 6,560 ft (1999.5 m) a high altitude kit is needed to avoid any reduced power output. See separate LP gas conversion instructions sheet.

Gas Supply Pressure Testing

Gas supply pressure for testing regulator must be at least

1" water column pressure above the manifold pressure shown on the model/serial rating plate.

Line pressure testing above ½ psi gauge (14" WCP)

The cooktop and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The cooktop must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

INSTALLATION INSTRUCTIONS

WARNING

Excessive Weight Hazard

Use two or more people to move and install cooktop. Failure to do so can result in back or other injury.

Style 1: Cooktop over undercounter built-in oven

IMPORTANT: Clamping brackets should not be used.

1.Using 2 or more people, place cooktop right side up into the cutout.

NOTE: Make sure that the front edge of the cooktop is parallel to the front edge of the countertop. If repositioning is needed, lift entire cooktop up from cutout to avoid scratching the countertop.

Style 2: Cooktop over cabinets

1.Determine whether your cabinet construction provides clearance for installing clamping brackets at cooktop base ends. This is the recommended location. Clamping brackets can be installed on the front and back of cooktop base bottom, if necessary.

A. Attachment screw holes for optional front and back location.

B. Clamping bracket (end locations recommended) C. Cooktop base bottom

D. Attachment screw

E. Attachment screw location (recommended)

2.The clamping brackets can be installed before or after the cooktop is placed into the cutout. Complete the following steps for the option you choose.

W10526085A specifications

The Whirlpool W10526085A is a premium refrigerator accessory designed to enhance the functionality and efficiency of Whirlpool refrigerators. This innovative replacement filter is engineered to deliver crisp, clean water and ice for the ultimate refreshment experience. With a focus on convenience and aesthetic appeal, it is a must-have component for maintaining high standards of hygiene and quality in your kitchen.

One of the standout features of the W10526085A is its advanced filtration technology. This filter utilizes activated carbon and other specialized materials to remove contaminants and impurities from water, ensuring that the drinking and cooking supply is free from chlorine, lead, and other harmful substances. By effectively reducing these impurities, the filter helps to enhance the taste and clarity of water and ice, making every sip more enjoyable.

Installation of the W10526085A is straightforward and user-friendly. Designed for compatibility with a range of Whirlpool refrigerator models, it can be easily replaced without the need for professional assistance. Simply follow the provided instructions to ensure proper alignment and secure placement, promoting optimal performance right from the start.

Another noteworthy characteristic of this filter is its exceptional filtration life. The W10526085A has a lifespan of up to six months, depending on usage and water quality. Regular replacement is essential to maintain the effectiveness of the filtration system and ensure that your water stays fresh. To help users keep track of replacement schedules, many Whirlpool refrigerators incorporate a filter change indicator, serving as an added convenience.

The W10526085A is also designed with eco-friendliness in mind. By reducing plastic waste associated with bottled water, this filter represents a sustainable choice for households committed to reducing their environmental impact. Moreover, the materials used in manufacturing the filter are often recyclable, further contributing to its green credentials.

In summary, the Whirlpool W10526085A is more than just a refrigerator accessory; it's a vital component for delivering pure, high-quality water and ice. Its advanced filtration capabilities, ease of installation, and commitment to sustainability make it a valuable addition to any Whirlpool refrigerator. By choosing this filter, you’re not only prioritizing health and safety but also enhancing your kitchen's overall functionality.