Whirlpool SC8900EMH manual Changing cooktop modules, Surface burner Modules, Grill Module

Changing cooktop modules

Make sure all controls are OFF and the cooktop parts are cool before removing them.

Surface burner	modules
Surface burner module	will work on either side of the cooktop.	Or,,,cet	Venturi

\

1. To remove,	liftzff	2. Lift slightly	the
surface grates.		handle.

1. To replace,		line	2.	Push	the	module
up	the venturi			until	it’s	seated
with	the	burner		properly.
orifices.			3.	Lower	front with
Grill	module			the handle.

3.With both hands,

pull module to- ward you to clear orifices. Lift out.

4. Install “surface grates.

Grill module will work on the right side of the cooktop only. A

1.To remove, lift off grills.

2.Lift front end of burner pan and pull toward you.

3.With both hands, - 4. Lift out the grease

lift	burner pan out	pan, being	care-
and	set aside.	ful not to	spill fat
		drippings.

1.To replace, insert the grease pan. Do not use the grill module unless the

grease pan is in

8 place.

2.Line up the venturi

with	the burner	place	while	low-	burners.
orifices.		ering	burner	pan.

All grill parts must be cleaned after each use to avoid excessive smoke, flate-ups, fat spoilage and odors. See page 13.