Whirlpool W10167111A LocationRequirements, Electrical Requirements, Water Supply Requirements

Page 3

LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

1/2" (1.25 cm)

2" (5.08 cm)

NOTES:

■It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

■Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed against an extended wall and the ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54" (137.16 cm) is recommended.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Refrigerator User Instructions Refrigerator SafetyInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Recommended Grounding Method LocationRequirementsElectrical Requirements Water Supply RequirementsConnect to Water Line Connect Water SupplyWater Pressure Reverse Osmosis Water SupplyUsing theControls Complete the InstallationRefrigerator USE Water and Ice Dispensers ConvertibleDrawer Temperature ControlCrisper Humidity Control Chilled Door BinIce Maker and Storage Bin Cleaning Refrigerator CareWater Filtration System Troubleshooting Changing the Light BulbsRefrigerator Operation Ice and Water Temperature and MoistureDispenser water is not cool enough AccessoriesWater dispenser will not operate properly Water is leaking from the dispenserApplication Guidelines/Water Supply Parameters Performance Data SheetsDisclaimer of Implied Warranties Limitation of Remedies Limited WarrantyItems Excluded from Warranty This limited warranty does not coverEL Usuario DEL Refrigerador Seguridad DEL RefrigeradorAntes de tirar su viejo refrigerador o congelador Instrucciones DE InstalaciónDesempaque el refrigerador Requisitos de ubicaciónPresión del agua Requisitos eléctricosRequisitos del suministro de agua Método de conexión a tierra recomendadoConexión del suministro de agua Conexión a la línea de aguaConexión al refrigerador Estilo CONDICIÓN/MOTIVO Ajuste Uso de los controlesCómo terminar la instalación Ajuste de los controlesPara guardar verduras Depósito enfriador de la puertaDespachadores de agua y hielo Para guardar la carneFábrica dehielo y depósito Cómo cambiar el filtro de agua Sistema de filtración de aguaCómo quitar y volver a colocar el depósito de hielo Estilo Luz de estado del filtro de agua en algunos modelosPara limpiar su refrigerador Cuidado DE SU RefrigeradorLimpieza Cómo cambiar los focosFuncionamiento delrefrigerador Solución DE ProblemasHielo y agua Temperatura y humedadHay fugas de agua del despachador AccesoriosEl despachador de hielo no funciona debidamente El despachador de agua no funciona debidamentePautas de aplicación / Parámetros para el Suministro de agua Hoja DE Datos DEL RendimientoEsta garantía limitada no cubre Whirlpool CorporationGarantía Limitada Exclusiones DE LA GarantíaRéfrigérateur Sécurité DU RéfrigérateurInstructions Dinstallation Déballage duréfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Spécifications del’alimentationen eau Exigences demplacementMéthode recommandée de mise à la terre Spécifications électriquesRaccordement à une canalisation d’eau Raccordement de la canalisation deauPression de leau Alimentation en eau par osmose inverseUtilisation des commandes Achever l’installationUtilisation DU Réfrigérateur Distributeurs d’eauet de glaçons Commande de température dans le tiroir ConvertibleRéglage de lhumidité dans lebac à légumes Compartiment fraîcheur dans la porteDistribution de glace Le distributeur deauDistribution d’eau Le distributeur de glaçonsMise en marche/arrêt de la machine à glaçons Style Pour retirer et réinstaller le bac à glaçons StyleMachine à glaçons et bac dentreposage Système defiltrationde leauNettoyage Remplacement des ampoules d’éclairageRemplacement du filtre à eau Entretien DU RéfrigérateurFonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéDe leau suinte du distributeur AccessoiresLe distributeur de glaçons ne fonctionne pas correctement Le distributeur deau ne fonctionne pas correctementSystème de filtration deau de la grille de la base Feuilles DE Données SUR LA PerformanceLa présente garantie limitée ne couvre pas Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée Articles Exclus DE LA GarantieTous droits réservés W10167111A SP PN W10167096A

W10167111A, W10167096A specifications

Whirlpool is synonymous with innovation in home appliances, and its model numbers W10167096A and W10167111A illustrate this commitment. These units are designed to enhance the kitchen experience, providing efficient solutions for everyday needs.

The Whirlpool W10167096A and W10167111A exemplify the brand's dedication to practical features. Both models are compatible with a variety of Whirlpool dishwashers, ensuring seamless integration within existing setups. Their designs focus on maximizing cleaning efficiency and convenience.

One of the standout features of these models is their advanced filtration system. This ensures that food particles and debris are eliminated effectively from dishes, resulting in sparkling clean plates, glasses, and utensils. Users appreciate the focus on hygiene, as this filtration aids in creating a cleaner dishwasher environment, which translates to better washing results.

Additionally, the W10167096A and W10167111A incorporate noise reduction technology. Practical for family settings, these appliances operate quietly, allowing for a peaceful kitchen environment while the dishes are being cleaned. This feature is particularly beneficial for open-plan living spaces or during evening hours when silence is desired.

Another notable characteristic is their energy efficiency. Designed with a focus on sustainability, these models consume less water and energy compared to traditional dishwashing methods. They help lessen the environmental impact while also reducing utility bills, a significant advantage for eco-conscious consumers.

Ease of use is another primary consideration in these models. They often come with user-friendly controls and are straightforward to install, making them attractive options for those who want to upgrade their kitchen without fuss. Additionally, both models are crafted with durable materials, ensuring longevity and resistance against wear and tear.

Overall, the Whirlpool W10167096A and W10167111A stand out for their blend of reliability and technology. With enhanced cleaning capability, noise reduction features, energy efficiency, and durable construction, they have quickly become essential tools in many households, facilitating a more effortless approach to kitchen cleanup. Investing in these models is not just about acquiring a dishwasher accessory; it’s about embracing a modern, efficient lifestyle in the kitchen.
Top Page Image Contents