Whirlpool W10167111A, W10167096A Accessories, Water dispenser will not operate properly

Page 11

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements” in either the Installation Instructions or the Use and Care Guide.

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

■New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order replacement filters, call 1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Standard Base Filter Cartridge:

Order Part #4396841 (T2RFWG2)

In Canada, Order Part #4396841B (T2RFWG2)

WATER FILTER CERTIFICATIONS

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Recommended Grounding Method LocationRequirementsElectrical Requirements Water Supply RequirementsConnect to Water Line Connect Water SupplyWater Pressure Reverse Osmosis Water SupplyRefrigerator USE Using theControlsComplete the Installation Water and Ice Dispensers ConvertibleDrawer Temperature ControlCrisper Humidity Control Chilled Door BinIce Maker and Storage Bin Water Filtration System CleaningRefrigerator Care Refrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water Temperature and MoistureDispenser water is not cool enough AccessoriesWater dispenser will not operate properly Water is leaking from the dispenserApplication Guidelines/Water Supply Parameters Performance Data SheetsDisclaimer of Implied Warranties Limitation of Remedies Limited WarrantyItems Excluded from Warranty This limited warranty does not coverEL Usuario DEL Refrigerador Seguridad DEL RefrigeradorAntes de tirar su viejo refrigerador o congelador Instrucciones DE InstalaciónDesempaque el refrigerador Requisitos de ubicaciónPresión del agua Requisitos eléctricosRequisitos del suministro de agua Método de conexión a tierra recomendadoConexión al refrigerador Estilo Conexión del suministro de aguaConexión a la línea de agua CONDICIÓN/MOTIVO Ajuste Uso de los controlesCómo terminar la instalación Ajuste de los controlesPara guardar verduras Depósito enfriador de la puertaDespachadores de agua y hielo Para guardar la carneFábrica dehielo y depósito Cómo cambiar el filtro de agua Sistema de filtración de aguaCómo quitar y volver a colocar el depósito de hielo Estilo Luz de estado del filtro de agua en algunos modelosPara limpiar su refrigerador Cuidado DE SU RefrigeradorLimpieza Cómo cambiar los focosFuncionamiento delrefrigerador Solución DE ProblemasHielo y agua Temperatura y humedadHay fugas de agua del despachador AccesoriosEl despachador de hielo no funciona debidamente El despachador de agua no funciona debidamentePautas de aplicación / Parámetros para el Suministro de agua Hoja DE Datos DEL RendimientoEsta garantía limitada no cubre Whirlpool CorporationGarantía Limitada Exclusiones DE LA GarantíaRéfrigérateur Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions DinstallationDéballage duréfrigérateur Spécifications del’alimentationen eau Exigences demplacementMéthode recommandée de mise à la terre Spécifications électriquesRaccordement à une canalisation d’eau Raccordement de la canalisation deauPression de leau Alimentation en eau par osmose inverseUtilisation DU Réfrigérateur Utilisation des commandesAchever l’installation Distributeurs d’eauet de glaçons Commande de température dans le tiroir ConvertibleRéglage de lhumidité dans lebac à légumes Compartiment fraîcheur dans la porteDistribution de glace Le distributeur deauDistribution d’eau Le distributeur de glaçonsMise en marche/arrêt de la machine à glaçons Style Pour retirer et réinstaller le bac à glaçons StyleMachine à glaçons et bac dentreposage Système defiltrationde leauNettoyage Remplacement des ampoules d’éclairageRemplacement du filtre à eau Entretien DU RéfrigérateurFonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéDe leau suinte du distributeur AccessoiresLe distributeur de glaçons ne fonctionne pas correctement Le distributeur deau ne fonctionne pas correctementSystème de filtration deau de la grille de la base Feuilles DE Données SUR LA PerformanceLa présente garantie limitée ne couvre pas Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée Articles Exclus DE LA GarantieTous droits réservés W10167111A SP PN W10167096A

W10167111A, W10167096A specifications

Whirlpool is synonymous with innovation in home appliances, and its model numbers W10167096A and W10167111A illustrate this commitment. These units are designed to enhance the kitchen experience, providing efficient solutions for everyday needs.

The Whirlpool W10167096A and W10167111A exemplify the brand's dedication to practical features. Both models are compatible with a variety of Whirlpool dishwashers, ensuring seamless integration within existing setups. Their designs focus on maximizing cleaning efficiency and convenience.

One of the standout features of these models is their advanced filtration system. This ensures that food particles and debris are eliminated effectively from dishes, resulting in sparkling clean plates, glasses, and utensils. Users appreciate the focus on hygiene, as this filtration aids in creating a cleaner dishwasher environment, which translates to better washing results.

Additionally, the W10167096A and W10167111A incorporate noise reduction technology. Practical for family settings, these appliances operate quietly, allowing for a peaceful kitchen environment while the dishes are being cleaned. This feature is particularly beneficial for open-plan living spaces or during evening hours when silence is desired.

Another notable characteristic is their energy efficiency. Designed with a focus on sustainability, these models consume less water and energy compared to traditional dishwashing methods. They help lessen the environmental impact while also reducing utility bills, a significant advantage for eco-conscious consumers.

Ease of use is another primary consideration in these models. They often come with user-friendly controls and are straightforward to install, making them attractive options for those who want to upgrade their kitchen without fuss. Additionally, both models are crafted with durable materials, ensuring longevity and resistance against wear and tear.

Overall, the Whirlpool W10167096A and W10167111A stand out for their blend of reliability and technology. With enhanced cleaning capability, noise reduction features, energy efficiency, and durable construction, they have quickly become essential tools in many households, facilitating a more effortless approach to kitchen cleanup. Investing in these models is not just about acquiring a dishwasher accessory; it’s about embracing a modern, efficient lifestyle in the kitchen.
Top Page Image Contents