ACCESSORIES
Return to Section TOC
OPTIONAL EQUIPMENT
FACTORY INSTALLED
There are no factory installed options available for the Power Wave 455R.
The water cooler is designed to cool only one welding gun and should be not used to cool multiple guns or other devices.
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
FIELD INSTALLED
•Gas Guard Regulator (K659-1)
The Gas Guard regulator is available as an option- al accessory for the Power Feed Robotic wire drive unit. Install the
•Voltage Sense Leads
The voltage sense leads connect at the front of the machine. (See Figure A.2.)
•Power Wave Water Cooler (K1767-1)*
The
Water cooler manufacturers often specify additives to the coolant such as fungicides or alkalies. Follow the manufacturers’ recommendations to achieve proper operation and long lifetime without clogging.
•Water Flow Sensor (K1536-1)
Water cooled guns can be damaged very quickly if they are used even momentarily without water flow- ing. Recommend practice is to install a water flow sensor such as on the water return line of the torch. When fully integrated into the welding system, the sensor will prevent welding if no water flow is pre- sent.
•Dual Cylinder Undercarriage,
•Coaxial Welding Cable, K1796
*The Dual Cylinder Undercarriage,
Return to Section TOC
Return to Master TOC
