RANGE HOOD USE

Operation

The canopy hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.

Hood control panel

A

B CD

A.Controls

B.Light switch

C.Blower switch

D.Blower speed control switch

Operating the light

1.Move the light switch to the “1” position. The light should turn on.

2.Move the light switch to the “0” position. The light should turn off.

Operating the blower

1.Move the blower switch to the “1” position. The blower should turn on.

2.Move the blower speed control switch to vary the blower speed from low (left) to high (right).

3.Move the blower switch to the “0” position. The blower should turn off.

RANGE HOOD CARE

Cleaning and Maintenance

Be sure lights are cool before cleaning the hood.

Exterior surfaces

Do not use steel wool or soap-filled scouring pads.

Rub in direction of the grain line to avoid marring the surface.

Always wipe dry to avoid water marks.

KitchenAid® Professional Formula Stainless Steel Cleaner & Polish is the cleaner recommended for cleaning stainless steel surfaces on this product. To order call our Customer Service Center at 1-800-442-9991 or order on-line at www.applianceaccessories.com and ask for part number 8171420. To order from Canada, call 1-800-807-6777.

If commercial cleaners are used, follow label directions. Do not use products that contain chlorine (bleach). Chlorine is a corrosive substance.

For routine cleaning and fingerprints, use liquid detergent soap and water, or all-purpose cleaner. Wipe with damp cloth or sponge, then rinse with clean water and wipe dry.

Filters

The filters should be washed frequently. Place metal filters in dishwasher or hot detergent solution to clean.

To remove filter:

Use two hands to remove filter. Push tab back to release the locking pin, pull down and forward. Repeat with other filter(s).

To reinstall filter:

1.Place back edge of filter into channel at rear of hood liner.

2.Push filter up while pushing tab back.

3.When filter is in place, release tab. Locking pin will hold filter in place. Repeat with other filter(s).

Replacing a halogen lamp

This hood liner uses 12-volt, 20 watt halogen lamps.

Turn off the range hood and allow the halogen lamps to cool.

Replace bulb using a tissue to handle bulb, or wearing cotton gloves. Do not touch bulb with bare fingers.

1.Disconnect power.

2.Remove 2 screws from the circular metal trim around the lamp assembly.

3.Pull the trim with the lamp assembly attached down far enough so that the lamp can be pushed out of the socket clips.

4.Insert the new lamp into the socket clips and push the lamp and trim assembly back up into the hood.

5.Replace the screws.

6.Reconnect power.

Accessories

Charcoal Filters (with grates) kit

Part Number 4396565

Replacement Charcoal Filters

Part Number 4378623

Two 6" (15.2 cm) round to 10" (25.4 cm) round

vent transition kit

........Part Number 4396915

10

Page 10
Image 10
KitchenAid RANGE HOOD LINER with INTERNAL BLOWER Range Hood USE, Range Hood Care, Operation, Cleaning and Maintenance

RANGE HOOD LINER with INTERNAL BLOWER specifications

The KitchenAid Range Hood Liner with Internal Blower is a perfect combination of form and function, designed to enhance your kitchen's ventilation while maintaining a sleek appearance. This product stands out in the crowded marketplace for several reasons, most notably its high-performance features that cater to both the aesthetic and practical needs of modern cooking environments.

One of the main features of the KitchenAid Range Hood Liner is its internal blower system. This integral component operates quietly—reducing noise levels while delivering powerful ventilation. The internal blower efficiently removes smoke, steam, and cooking odors, keeping your kitchen fresh and comfortable. This technology eliminates the need for an external blower, streamlining installation and minimizing the complexity associated with traditional ventilation systems.

In terms of power, the range hood liner typically offers multiple fan speeds, allowing you to adjust the airflow based on your cooking habits. Whether you are simmering a delicate sauce or searing meat at high temperatures, the customizable speed settings ensure that you can effectively manage odors and heat without overwhelming noise. Additionally, many models feature a convenient delay-off option, which keeps the fan running after cooking is done, providing continued ventilation to clear lingering smells and humidity.

The design of the KitchenAid Range Hood Liner is equally impressive. It is constructed to fit seamlessly into cabinetry, giving your kitchen a sleek, integrated look. Made with premium materials such as stainless steel, the liner is not only durable but also easy to clean and maintain. Many models include dishwasher-safe filters that capture grease and particulates, ensuring your kitchen remains spotless while prolonging the life of your range hood.

Safety is also a priority with features such as the automatic shut-off, which prevents overheating and offers peace of mind during cooking sessions. Energy-efficient LED lighting is another characteristic that improves visibility over your cooking surface, making meal preparation safer and more enjoyable.

In summary, the KitchenAid Range Hood Liner with Internal Blower combines powerful performance, aesthetic charm, and innovative features, making it an excellent choice for both amateur cooks and culinary enthusiasts alike. With its advanced technology, durable design, and thoughtful safety features, it promises to elevate the functionality and ambiance of any kitchen space.