Electrical Requirements

IMPORTANT: The hood must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, latest edition, or Canadian Electrical Code, CSA C22.1, latest edition.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park, Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this hood be provided.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure range hood is properly grounded.

Do not have a fuse in the neutral or ground circuit.

The range hood must be connected with copper wire only.

The range hood should be connected directly to the fused disconnect (or circuit breaker) box through flexible armored or nonmetallic sheathed copper cable.

A UL- or CSA-listed strain relief must be provided at each end of the power supply cable. Wire sizes (copper wire only) and

connections must conform with the rating of the appliance as specified on the model/serial rating plate.

Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70, latest edition, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91, latest edition, and all local codes and ordinances.

INSTALLATION INSTRUCTIONS

Prepare Location

Cover countertop or cooking surface with a thick, protective covering to prevent damaging them.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood. Failure to do so can result in back or other injury.

1.Mark the locations of the four ⁷⁄₃₂" (5.6 mm) dia. holes on the hood support as shown.

2³⁄₄"

A

(7.0 cm)

B

wall

17⁵⁄₁₆"

 

(44.0 cm)

⁷⁄₃₂" (5.6 mm)

 

2.Drill the four holes.

3.Provide a rectangular clearance hole for the blower motor housing.

2³⁄₄"

A

wall

(7.0 cm)

 

B

 

 

 

C

 

Hood size

A

B

C

36"

(91.4 cm)

28" (71.1 cm)

14" (35.5 cm)

16" (40.6 cm)

48"

(121.9 cm)

36" (91.4 cm)

18" (45.7 cm)

14¹⁄₂" (36.8 cm)

 

 

 

 

 

Hood size

A

B

36" (91.4 cm)

31⁷⁄₁₆" (79.9 cm)

15²³⁄₃₂" (39.9 cm)

 

 

 

7

Page 7
Image 7
KitchenAid RANGE HOOD LINER with INTERNAL BLOWER Installation Instructions, Electrical Requirements, Prepare Location

RANGE HOOD LINER with INTERNAL BLOWER specifications

The KitchenAid Range Hood Liner with Internal Blower is a perfect combination of form and function, designed to enhance your kitchen's ventilation while maintaining a sleek appearance. This product stands out in the crowded marketplace for several reasons, most notably its high-performance features that cater to both the aesthetic and practical needs of modern cooking environments.

One of the main features of the KitchenAid Range Hood Liner is its internal blower system. This integral component operates quietly—reducing noise levels while delivering powerful ventilation. The internal blower efficiently removes smoke, steam, and cooking odors, keeping your kitchen fresh and comfortable. This technology eliminates the need for an external blower, streamlining installation and minimizing the complexity associated with traditional ventilation systems.

In terms of power, the range hood liner typically offers multiple fan speeds, allowing you to adjust the airflow based on your cooking habits. Whether you are simmering a delicate sauce or searing meat at high temperatures, the customizable speed settings ensure that you can effectively manage odors and heat without overwhelming noise. Additionally, many models feature a convenient delay-off option, which keeps the fan running after cooking is done, providing continued ventilation to clear lingering smells and humidity.

The design of the KitchenAid Range Hood Liner is equally impressive. It is constructed to fit seamlessly into cabinetry, giving your kitchen a sleek, integrated look. Made with premium materials such as stainless steel, the liner is not only durable but also easy to clean and maintain. Many models include dishwasher-safe filters that capture grease and particulates, ensuring your kitchen remains spotless while prolonging the life of your range hood.

Safety is also a priority with features such as the automatic shut-off, which prevents overheating and offers peace of mind during cooking sessions. Energy-efficient LED lighting is another characteristic that improves visibility over your cooking surface, making meal preparation safer and more enjoyable.

In summary, the KitchenAid Range Hood Liner with Internal Blower combines powerful performance, aesthetic charm, and innovative features, making it an excellent choice for both amateur cooks and culinary enthusiasts alike. With its advanced technology, durable design, and thoughtful safety features, it promises to elevate the functionality and ambiance of any kitchen space.