The lower oven light
The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, use the Manual Oven Light Switch under the oven control panel.
Electrical Shock and
Personal Injury Hazard
l Make sure oven and light bulb are cool and power to the range has been turned off before replacing the light bulb. Failure to do so could result in electrical shock or burns.
l The bulb cover must be in place when using the oven. The cover protects the bulb from breaking, and from high oven temperatures. Because bulb cover is made of glass, be careful not to drop it. Broken glass could cause injury.
To replace the oven light:
1.Unplug appliance or disconnect at the main power supply.
2.Remove the glass bulb cover in the back of the oven by pushing the wire holder to the side and pulling out bulb cover.
3.Remove the light bulb from its socket. Replace the bulb with a
4.Replace the bulb cover and snap the wire holder into place. Plug in appliance or reconnect at the main power supply.
NOTE:
l The oven light should not be used during the
lIf you need to replace the cooktop light, contact an authorized Whirlpool service technician. (See Step 3 under “IfYou Need Assistance Or Service,” page 30.)
27