Frequency Range: | 400 - 16k Hz |
Nominal Coverage: | 90° horizontal X +15 to |
| zontal plane can be adjusted by altering mounting position on the low frequency enclosure before tightening bolts. |
DI: | 9.0 dB (600 to 16,000 Hertz average) |
Q: | 8.0 (600 to 16,000 Hertz average) |
Maximum Output: | 131.5 dB SPL calculated peak, 1 meter, half space. |
Impedance: | 8 ohms nominal |
9.0ohms minimum at 8,000 Hertz 30 ohms maximum at 475 Hertz
Maximum Input Power: 50 watts rms (8 hours of 6 dB crest factor pink noise, 1,000 to 10,000 Hertz)
60 watts rms (2 hours of 6 dB crest factor pink noise, 1,000 - 10,000 Hertz, AES method)
Sensitivity: | 107.5 dB half space, 1 watt, 1 meter |
Crossover Frequency: | 1,000 Hertz or higher, 24 dB per octave |
Connectors: | Barrier strip screw terminals accept up to #10 AWG stranded wire. Four terminals: (two HF INPUT and two post |
| compensation HF OUTPUT). HF OUTPUT factory wired to compression driver. |
Transducers: | 1.5” (38mm) exit, 2.5” (63.5mm) titanium diaphragm compression driver. |
Mounting Hardware: | Attaches to top of the low frequency cabinet using three |
Size: | 30” wide X 16” high X 20” deep (762mm X 406mm X 508mm) |
Weight: | 50 lbs. (shipping), 40 lbs. (net), 22.7/18.4 kilograms |
SPL and Impedance vs. Frequency
| SPL |
SPL (dB) | Impedance (Ohms) |
| Impedance |