ProperLoading
Preparation for loading
It is not necessary to rinse dishes before putting them into the dishwasher. Just remove large pieces and quantities of food and bones. The filtering system helps keep food parti- cles out of the wash water. Small particles are flushed away as water is pumped out. Larger parti- cles are trapped on the filter system screen. Refer to “Dishwasher care 81cleaning” on page 12 for filter screen cleaning instructions.
Always load dishes so soiled surfaces are reached by spray from rotating spray arm. Water must be able to drain off completely for best drying results. Be careful to separate Items so spray can reach all surfaces.
Top rack loading
The top rack is designed for cups, glasses and smaller items.
Cup and glass load
l
l
l
l
Place so open ends face down for cleaning and draining.
Load glasses in top rack only. Bottom rack is not designed for glasses. Damage may occur.
Place items in the rows between prongs. Plac- ing them over the prongs can lead to breakage.
Be sure lightweight items are held firmly in place.
l China, crystal and other delicate items must not touch each other during dishwasher operation. Damage may occur.
Cup and glass load
Mixed load
. Load plastrc items only in the top rack. Only plastic items marked”Dishwasher Safe” are recommended.
l
l
Load plastic items so the force of the spray does not move them during the cycle.
Plastic items can be melted in the bottom rack.
Utensil load
l Small bowls, pans and other utensils can be placed in the top rack.
Mixed load
7