Whirlpool DU1800XT manual Before starting your, Changing a setting

Page 8

Drying Option

Selects3r Switcl h

Before starting your

1.Spin the Lower Spray Arm to make sure nothing will stop it from turning freely

2.Be sure nothing blocks the center area in the bottom rack. The center wash tower extends through this area during the cycle.

dishwasher

3.Run hot water at sink nearest dishwasher until it is hot, then turn it off.

4.If you have a disposal in the sink, run it to clear any food scraps, then turn it off. This will insure good drainage.

Starting your dishwasher

A . ,,GHWb”. 9)

NORMAL WASH Cycle...

1.Select a drying option.

2.Turn the Cycle Control Knob so that it points to NORMAL WASH.

3.Latch the door to start the cycle.

LIGHT WASH Cycle...

1.Select a drying option.

2.Turn Cycle Control Knob until it points to

LIGHT WASH.

3.Latch the door to start the cycle.

Changing a setting

You can change a setting anytime during any cycle.

1.Unlatch the door to stop the cycle.

2.Turn the Cycle Control Knob clockwise to the cycle you want.

RINSE & HOLD Cycle...

1.Select AIR DRY Option only.

2.Turn the Cycle Control Knob clockwise until it points to RINSE & HOLD.

3.Latch the door to start the cycle.

3.Be sure the detergent dispensers are filled properly for the new cycle.

4.Latch the door to start the cycle.

Image 8
Contents Undercounter Dishwasher Important safety instructions Parts and features Model DUl800XTWater must be hot Preparing the load for washingQuiet operating tips Proper loading Top rack loadingBottom rack loading SilwrMare basket loadingDetergent chart Adding detergentDetergent dispenser How much detergent to useChanging a setting Before starting yourTo add a dish after starting Selecting a cycleHeat DRY or AIR DRY? Energy saving tips Materials Care & cleaningCrystal Problems CommonCaused Before calling for assistance If you need service If you have a problem?If you need assistance% 4wAREWarranty