-Press OK button to confirm and enter the next digit setting.
-When the area code has been set (6 digits length), press OK button once
toenter the long distance code (LDS CODE) setting (4 digits length).
-The LCD displays SET LDS CODE.
-Use or buttonto select the first digit of the LDS code. If the long
distancecode is 01, then the first two digits must be left blank. Toinsert a
blank,press OK.
-Press OK button to confirm and enter the next digit setting.
-Press Xbutton to exit to the standby mode.
2.7- SET FLASH
-After entering the SET FLASH menu, press OK.
-Use or buttonto select the flash time (100ms/300ms/600ms).
-Press OK button to confirm.
(Inthe UK, the default value is 100ms, in France, the default value is
300ms.)
-Press Xbutton to exit to the previous menu.
2.8- DIM: X- - ->X
-After entering the DIM: X--->X menu, press OK.
-Use or buttonto select ON/OFF to activate/deactivate the
DIM:X- - ->X function.
-Press OK button to confirm. (The default mode is ON)
Ifthe DIM: X- - ->X function is activated, the maximum number of digits that
canbe shown on the LCD is 18 small digits.
Ifthe DIM: X--->X function is not activated, the maximum number of digits
SETTINGUP
10