INSTALLATION
-Connect thehandset cord.
-Open the battery door.
-Insert 4 x AAA alkaline batteries in the battery compartment.
-Snap the battery door back in place.
-Connect the telephone cord in LINE 1 jack. (*) The LINE 2 can be used
toconnect amodem.
-Connect the adaptor cord. (**) (optional)
-Connect theheadset cord(optional).
TheAC adaptor can replace the batteries for the phonebook and caller ID
functions.But in case of power cut, batteries will always be useful to retain
thememories andfor thephonebook andCID function.
2- RINGER SELECT SWITCH
Setthe ringer switch to the desired level (HI/LO).
Forthe maximum ringer volume, move the ring selector to HI position.If
youprefer a gentle ring, move the ring selector to the LO position
Note: Subscription may be required to use the Caller ID and other
valueadded services. Please contact your Network Service
Providerfor further details. If you have not subscribed to the Caller
IDor some of the other Value added services, the Caller ID and
MessageWaiting features will not work but all other features and
functionsin your JUPITER 4 telephone will work normally.
3- FLASH MODE (ETR / R SWITCH)
-ETR : earth recall.
-R : recall (R=100ms) = UK setting.
6
*ClassifiedTNV-3 according to EN60950 standard.
**Classified«hazardous voltage» according to EN60950 standard.