Silverware basket loading

Load forks and spoons so they don’t nest together. Spray can’t reach nested items.

Mix items in each section of the basket. Small items - baby bottle caps, jar lids, etc. -can be put in any section.

The silverware basket can be loaded while it’s in place on the door, or it can be taken out for loading on the counter or table. Always unload or remove the basket before unloading the racks to avoid spilling water droplets on the silverware.

To remove the basket, slide it toward the top of the door - by the handle. Lift it off the holding buttons. Replace it in reverse order.

To open the basket, unhook the latch as shown. Be sure the cover is completely latched before pulling out the bottom rack and before closing the dishwasher door.

I			I
To avoid cuts from sharp items (knives,
forks,	skewers,	etc.), make sure these items
are put	in point	down.

Cutlery basket loading

Remove and replace the cutlery basket in the same way as the silverware basket. Use the cut- lery basket for long items. Remove the basket and tip contents onto a cutting board to unload. This can help avoid accidents with sharp points and edges.