Operating Instructions
Continued
Cycle selector buttons
000
Option selector buttons
Cycle control knob
Starting your dishwasher
1.Push a Cycle Selector Button for the desired cycle.
2.Push an Option Selector Button for each desired option. (Use AIR DRY for RINSE & HOLD Cycle.) The indicators above the buttons will show which cycle and option(s) have been selected.
3.Turn Cycle Control Knob clockwise to point to a desired cycle. You will feel a definite stop at each cycle mark. The dishwasher will automati- cally start that cycle.
NOTE: HEAVY WASH and POTS & PANS Cycles share the same spot on the dial. LOW ENERGY WASH and CHINA CRYSTAL Cycles also share a spot on the dial. The Cycle Selec- tor Button determines which cycle operates.
To add a dish after starting
1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LOW ENERGY WASH.
2.Lift up on the door latch to unlatch door and stop the cycle. Don’t open the door until the spray arms stop spinning.
3.Open the door and add the dish.
4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle.
5.Press door firmly to latch it. The dishwasher will automatically start where it stopped.
4