What happens in each, Option, Using delay wash

What happens in each

Heat Dry option

If the Heat Dry option is selected, air in the dishwasher is heated during the “dry”part of the cycle. For best results, use a liquid rinse agent.

Energy Saver (Dry) option

If the Energy Saver (Dry) option is selected, air in the dishwasher is not heated during the “dry”part of the cycle. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Some items (such as plastics) may need towel drying. For best drying results, use a liquid rinse agent.

option

SELECT
		or	or
models	with	models	wlth	models with
rocker	switch	3 or 5 buttons		7 buttons
SELECT
		or
moclale wfth		models with		buttons
rocker	switch

Low-Energy Washing option

(on some models)

When the Low-Energy Washing option is selected, water heating is reduced during the main wash and final rinse. This will reduce the amount of electricity needed to run the dishwasher. However, dishes may not wash as well. See page 14.

Using delay wash

(on some models)

You can set the dishwasher to start a cycle 1 or 2 hours later.

1.Push desired Cycle Selector button. -

2.Push desired Option Selector button(s).

3.Turn Cycle Control knob clockwise to the number of hours you want the dishwasher

	to delay before the selected cycle starts.	Example for P-hour delayed Pots & Pans
	4. Close and latch the door.	Example for P-hour delayed Pots & Pans
	4. Close and latch the door.	cycle wlth Energy Saver Dry option

NOTE:

lYou can add items while time is counting down. Close and latch the door. The Cycle Control knob will not advance if the door is unlatched.

lRinse & Hold and Light Wash cycles cannot be delayed.