Whirlpool GB1 warranty Maintenance, Removing the Door, To remove the door, To refit the door

Page 5

MAINTENANCE

	WARNING	-	Use protective gloves.
	WARNING	-	Ensure the oven is cold before carrying out the following operations.
		-
		-	Disconnect power before servicing.

REMOVING THE DOOR

To remove the door:

1.Open the door fully.

2.Lift the catches and push them forwards as far as they will go (fig. 1).

3.Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (fig. 2).

To refit the door:

1.Insert the hinges in their seats.

2.Open the door fully.

3.Lower the two catches.

4.Close the door.

Fig. 1

Fig. 2

MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)

1.Remove the side accessory holder grilles (Fig. 3).

2.Pull the heating element out a little (Fig. 4) and lower it (Fig. 5).

3.To reposition the heating element, lift it up, pulling it slightly towards you, be sure it comes to rest on the lateral supports.

Fig. 3

Fig. 4

Fig. 5

GB4

Image 5

Contents Apply the label from warranty here User and maintenance manualScrapping of household appliances Important Safety InstructionsYour Safety and That of Others is Very Important Safeguarding the Environment InstallationTroubleshooting Guide Declaration of ConformityCleaning AFTER-SALES ServiceRemoving the Door MaintenanceTo remove the door To refit the doorInstructions for Oven USE Disconnect the oven from the power supplyReplacing the Oven Lamp To replace the rear lamp if presentCompatible Accessories Control Panel Description To change the temperatureStarting the oven Selecting the cooking functionSelecting the end of cooking time Function Description TableMinute minder Door lockMin Recipe Function Shelf Temperature TimeCooking Table Recommended USE and Tips 5019 610