Whirlpool GB1 warranty Instructions for Oven USE, Replacing the Oven Lamp

REPLACING THE OVEN LAMP

To replace the rear lamp (if present):

1.Disconnect the oven from the power supply.

2.Unscrew the lamp cover (Fig. 6), replace the lamp (see note for lamp type) and screw the lamp cover back on (Fig. 7).

3.Reconnect the oven to the power supply.

Fig. 6 Fig. 7

N.B.:

-Only use 25-40W/230V type E-14, T300°C incandescent lamps.

-Lamps are available from our After-sales Service.

IMPORTANT:

-Do not use the oven until the lamp cover has been repositioned.

INSTRUCTIONS FOR OVEN USE

FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION

3

	1
6	2
	5
	11
	4
	7

10

9

8

1.Control panel

2.Upper heating element/grill

3.Cooling system (if present)

4.Dataplate (not to be removed)

5.Light

6.Baking ventilation system (if present)

7.Turnspit (if present)

8.Lower heating element (not visible)

9.Door

10.Position of shelves

11.Rear wall

N.B.:

-At the end of cooking, after the oven has been switched off, the cooling fan may continue to run for a while.

GB5