Whirlpool GMC275PD, GMC305PD After the Self-Cleaning cycle starts, Example for 230 start time

Page 20

USING YOUR OVEN

3. PRESS			YOU SEE	7. After the Self-Cleaning cycle ends:
				YOU SEE
	DELAY			YOU SEE
	DELAY
	START
	TIME			CLEAN
			START	TIME

4. Set the start time.

PRESS	YOU SEE
HR	MIN

CLEAN

STARTTIME

(example for 2:30 start time)

Press the “up” (s) or “down” (t) pad(s) until the desired start time shows on the display. The oven will automatically come up with the stop time by adding the set cleaning time to the set start time.

5. PRESS

YOU SEE

START

ENTER

DELAY

DOOR LOCKED

LOCKED goes off and the door unlocks.

NOTE: The stop time will be the start time plus the cleaning time.

8.After the oven cools to room tempera- ture, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

6.After the Self-Cleaning cycle starts:

YOU SEE

HEAT

DOOR LOCKED CLEAN

TIME

The door will lock as soon as the oven starts to heat up.

To stop the Self-Cleaning cycle at any time:

PRESS

YOU SEE

OFF

CANCEL

	DOOR LOCKED CLEAN
TIMED	TIME

YOU SEE

If the oven temperature is too high for baking/roasting when you press OFF/CANCEL, “cln,” “cool,” TIMED, DOOR LOCKED, and CLEAN TIME will appear on the display until the oven cools.

20

Image 20

Contents Use And Care 4452006AThank you for buying a Whirlpool appliance Oven Safety Your safety and the safety of others is very importantOven Safety Parts and Features Model RMC275PD/RMC305PD shownUsing Your Oven Where to place pansPositioning racks and pans Bakeware choicesUsing aluminum foil Electronic oven controlDisplay/clock Will occur to the oven bottom finish Do not coverSet time Setting the clockAudible signals Using the electronic Minute Timer To cancel the Minute TimerDisabling the timer reminder tones Starting a functionCanceling a function When roasting or cooking casseroles, put food in ovenSet temperature optional Baking/roastingAdjusting the oven temperature control When baking, put food in oven after oven is preheatedSet new offset temperature Hold for Factory setting SecondsEnter the adjustment How to determine the amount of adjustment neededTo display temperatures in C instead of F Place the rack where you need itTo custom broil at a lower temperature Broiling guidelinesUsing the electronic Mealtimer control Set the temperature optional When baking/roasting is doneSet the cook time or stop time Disabling the Cook Time reminder tonesWhen the start time is reached Set the start timeSet the cook time Display counts down cook timeOven vent Before you start Using the Self-Cleaning CycleBefore you start the Self-Cleaning cycle, make sure you Setting the controls To start cleaning immediatelySet the cleaning time optional After the Self-Cleaning cycle endsExample for 230 start time After the Self-Cleaning cycle startsTo stop the Self-Cleaning cycle at any time How the cycle works Time In HoursCleaning chart Caring for Your OvenInsert small end of pin here Removing the oven doorTo remove Open door all the way To turn the lights on or off when the oven door is closed Oven lightsTroubleshooting When self-cleaning your ovenOven does not work Cooking resultsDisplay messages If you need assistance or service If you need replacement partsFor further assistance Our consultants provide assistance withWhirlpool