Whirlpool 3ET16NKXDG00 Adjusting the utility compartment and tray, Adjusting the refrigerator

Adjusting the utility compartment and tray

(on some models)

The utility compfutment and tray slide from one side-to the other for more flexible storage. The tray fits on either side of the utility comrtment or partially underneath ft. Experiment and find the positiins that work best for you.

To adjust the utility compartment or tray:

1.Lift the front slightly.

2.Slide to desired position.

3.Lower front to lock into place.

Adjusting the refrigerator

Adjust-the shelvesto match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk, and other heavy food items.

Cantilever shelves

To remove a shelf:

1.Remove items from shelf.

2.Tilt shelf up at front.

3.Lii shelf at back.

4.Pull sheff straight out.

To replace a shek

1.Guide the rear shelf hooks into the slots in the shelf supports on the back liner wall.

2.Tilt front of shelf up until hooks drop into slots.

3.Lower front of shelf to a level position.

shelves

STYLE 1

NOTE: Glass shelves are heavy. Handle them carefully .

Slide-out	shelves
To remove	the shelves:	STYLE2

1.Remove all items from the shelf.

2.Slide shelf straight out to the stop.

3.Lii the front slightly.

4.Slide shelf out the rest of the way.

To replace the shelves:

1.Fit back of shelf on top of guide with wire stops on the bottom of the guide.

2.Lii the front.

3. Slide shelf in until it clears all stops. 11

11