Whirlpool 3ET16NKXDG00 manual Adjusting the EZ-Trackm, Refrigerator shelf

Adjusting the EZ-Trackm

(on some models)

The U-Track shelf slide from side to side for more flexible storage in your refrigerator.

To slide shelf sld+tmMe:

1.Lii slightly on shelf front.

2.Slide to desired bcatbn.

3.Lower shelf front to level position.

NOTE: You do not have to remove small items from the shelf before moving it side-to- side. You may need to remove larger items.

To remove the shelf:

1.Remove all items from the shelf.

2.Hold back of shelf with one hand.

3.Lii front of shelf to 45” angle.

4.Lower shelf slightly to release shelf from upper channel of track Then pull shelf straight out.

NOTE: Shelf is heavy. Make sure you use both hands when removing shelf.

To remove shelf track:

1.Lii both sides of track slightly.

2.Pull track straight out.

To replace shelf track:

1.Guide track hooks into the shelf support slots on the back wall of the cabinet.

NOTE: Make sure all three track hooks are in slots and that the slots are parallel to each other.

2.Push track backward and down.

3.Check that track is completely seated in the shelf supports.

refrigerator shelf

then slide to new location.

Umer channel

HoM wtth both hands and lift front to 45’ angle.

Hold both	sides and
lift up and	out
Make	Shetf
sure
	\ support
both
sets of
hooks
are in
suppoRt
slots.

12