Removing the pull-out freezer floor
(on some models)
The freezer floor pulls out for easier access to foods in the back of the freezer and for easier cleaning.
To remove the freezer floor:
1.Lii both back “fences” up and out.
2.Pull floor out about 1 inch (2.5 cm) with one hand around the air tower section (center back) and one hand at center front.
3.Lii floor up at rear until hooks release from cabinet.
4.Pull floor out the rest of the way.
To replace the freezer floor:
1.Position back of floor into freezer opening.
2.Slide floor straight in until hooks drop into place at rear of cabinet.
3.Replace “fences” by aligning pins with sockets in the floor. Push down until they snap into place.
Using the ice cube trays
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer you store cubes, the smaller they get.
To remove Ice:
1.Hold tray at both ends.
2.Twist slightly.
17