Removing the base grille
To remove the base grllb:
1.Open the refrigerator door.
2.Grasp the grille with both hands.
3.Push down on the top edge of the grille to release the top clips.
4.Roll grille toward you to release top dips.
5.Pull grille away from the refrigerator.
NOTE: DC not remove the Tech Sheet fastened behind the grille.
To replace the base gtllle:
1.Line up the edges of the grille with the outside edges of the cabinet.
2.Roll the grille toward you.
3.Place the lower clips in the openings in the metal panel.
4.Roll the grille toward the cabinet until the top dips snap into place.
5.Close the refrigerator door.
See cleaning instructions for defrost pan and condenser coils on page 23.
Condenser D&o81
Cilpr
Changing the light bulbs
STYLE 1
Electrical Shock Hazard
Before removing a light bulb or removing a light shield for cleaning, either unplug the refrigerator or disconnect the elec- tricity leading to it at the main power
WP~.
Failure to do so could rwuft in electrical
shock.
LJ
To change refrigerator light:
1.Disconnect refrigerator from power WPly .
2.Reach behind Control Panel to remove bulb.
3.Replace with a
4.Reconnect refrigerator to power suppfy.
19