To reinstall shelf:
1.Hold shelf at front and back.
2.Tilt front of shelf up to a 45” angle to track.
3.Insert both rear shelf slides into upper channel of track.
4.Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are securely in the track before letting go of shelf.
Insert rear shelf slides
into upper channel of track. /
Removing the crisper and crisper cover
To remove the crisper:
1.Slide the crisper straight out to the stop.
2.Lift the front slightly.
3.Slide out the rest of the way.
4.Replace in reverse order.
Pull out to the stop, lift the front, and pull again.
Style I
To remove the cover:
1.Hold cover firmly with both hands and lift front of cover off supports.
2.Lift cover out by pulling up and out.
To replace the cover:
1.Fit back of cover into notch supports on walls of refrigerator.
2.Lower front into place.
Style 2
To remove the cover:
1.Push up glass insert from the bottom, then slide out with both hands.
2.Lift front of cover frame.
3.Lift cover frame up and out.
To replace the cover:
1.Fit back of cover frame into notch supports on walls of refrigerator, then lower front into place.
2.Slide back of glass insert into place, then lower front into place.
Lift the cover front, then the back.
13