Removing the Doors
Please read these helpful you start
l Before you start, either unplug the refrigerator or disconnect the electricity leading to it at the main power supply and remove any food from door shelves.
l When removing hinges, keep doors closed until ready to lift free from cabinet.
l To remove doors, start at the top hinge and work down.
l To replace doors, start at the bottom hinge and work up.
lLine up doors so they are centered between the sides of the cabinet and are parallel with each other.
l If refrigerator light does not go out when door is closed, the door may be too low. Use a thicker spacer if necessary.
l Door seal may be adjusted by removing the top hinge and adding or removing shims to the bottom hinge.
l Set the door gap at 17.5 mm (l% inch). The diameter of a dime is about right. See figure.
l The refrigerator must be level and sitting on a solid floor.
hints before
Cabinet
8 mm | (YE”) | Countersink | Oval | sealing | Handle | Oval sealing |
handle | screw | screw | screw (use | |||
hinge | screw | screw | (use | on bot- |
| on tops of |
toms | of doors) |
| ||||
doors)
27