Installing it properly
1.Allow 1.25 cm (% inch) space on each side and at the top of the refrigerator for ease of installation.
2.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
3.The refrigerator can be flush against the back wall.
4.Make sure the ice maker water supply has been connected. Refer to Installa- tion Instructions.
Leveling it
Your refrigerator has two front leveling screws - one on the right and one on the left. To adjust one or both of these, follow the directions below.
1.Remove base grille. (See page 17.)
2.To raise front, turn screw clockwise.
3.To lower front, turn screw counter- clockwise.
4.Check with level.
5.Replace base grille. (See page 17.)
to lower
Use a screw- driver to adjust
screw