Whirlpool 2188766 manual Electrical Requirements, Water Supply Requirements, Base Grille

Page 5

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Water Supply Requirements

Read all directions carefully before you begin.

IMPORTANT:

■If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

Tools Required: Flat-blade screwdriver, ⁷⁄₁₆ in. and ¹⁄₂ in. open- end wrenches or two adjustable wrenches, ¹⁄₄ in. nut driver and drill bit, hand drill or electric drill (properly grounded).

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄ in. (6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆ in. (4.76 mm) saddle valve which reduces water flow and clogs more easily.

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207-827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, see “Troubleshooting” or call a licensed, qualified plumber.

Reverse Osmosis Water Supply

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the system needs to be a minimum of 40 to 60 psi (276 - 414 kPa).

If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 - 414 kPa) a booster pump can be inserted into the small tubing that goes from the cold water line to the reverse osmosis system.

If the water dispenser is still not dispensing water properly:

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

■If your refrigerator has a water filter cartridge, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter cartridge. See “Water Filtration System.”

If you have questions about your water pressure, refer to “Troubleshooting” or call a licensed, qualified plumber.

Base Grille

To remove the base grille:

1.Open both doors.

2.Place hands along the ends of the grille, with your thumbs along the top. Push in with your thumbs and pull up on the bottom.

NOTE: Be sure to refasten the Tech Sheet behind the base grille after cleaning.

To replace the base grille:

1.Open both doors.

2.Line up the grille support tabs with the metal clips.

3.Push the grille firmly to snap it into place.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 2188766 Side by Side RefrigeratorUse & Care Guide Table of Contents Before you throw away your old refrigerator or freezer Refrigerator SafetyCleaning before use Installation InstructionsUnpacking Location RequirementsBase Grille Electrical RequirementsWater Supply Requirements Door Removal Style Door and Hinge ReplacementHandle Removal optional Water Supply Connection Connecting to Water LineDoor Closing Water System Preparation Connecting to Refrigerator StyleRefrigerator USE Using the ControlsNormal Sounds Ensuring Proper Air CirculationWater and Ice Dispensers Water Filtration System Water Filter Status LightClean the Ice Storage Bin Using the Dispenser Without the Water FilterIce Maker and Storage Bin Flushing the Water System After Replacing FilterRefrigerator Shelves Adjustable Flip-up ShelfFlip-up Shelf Deli DrawerConvertible Vegetable/Meat Drawer Crisper and Covers Convertible Vegetable/Meat Drawer Temperature ControlCrisper Humidity Control Wine or Can/Bottle RackDoor Features Cleaning your refrigerator CleaningChanging the Light Bulbs Dispenser Light on some modelsVacation and Moving Care Power InterruptionsTroubleshooting Ice dispenser will not operate properly Off-taste, odor or gray color in the iceIce storage bin difficult to remove Water dispenser will not operate properlyIf you need replacement parts Temperature is too warmWater flow from the dispenser decreases noticeably Dispenser water is not cool enoughWater Filter Certifications AccessoriesApplication Guidelines/Water Supply Parameters Product Data SheetsSubstance Reduction Min. Required % 2188766 WarrantyWhirlpool Corporation will not pay for

2188766 specifications

The Whirlpool 2188766 is a standout appliance known for its quality and practicality, specifically tailored for enhancing kitchen efficiency and user convenience. This refrigerator has been designed with a focus on maximizing storage space while ensuring that food items are kept at optimal freshness levels.

One of the main features of the Whirlpool 2188766 is its spacious interior, which includes adjustable shelves that can be customized according to the user's needs. This flexibility allows for the easy accommodation of larger items, making it effortless to store everything from tall bottles to bulky containers. Additionally, the refrigerator is equipped with humidity-controlled crispers that are ideal for fruits and vegetables, helping to retain moisture and prevent spoilage.

The technology incorporated into the Whirlpool 2188766 is quite advanced, with the brand’s commitment to innovation evident in its cooling system. This model utilizes a high-efficiency compressor that ensures consistent temperature control, keeping all contents at the perfect temperature. Notably, the refrigerator is designed to be energy efficient, which can lead to significant savings on electricity bills while also being more environmentally friendly.

Another remarkable characteristic of the Whirlpool 2188766 is its user-friendly interface. The layout and design promote effortless organization, with ample door bins that offer easy access to frequently used items. Moreover, the interior lighting employs LED technology, providing bright illumination while consuming less energy and enhancing visibility.

In addition to its practicality, the Whirlpool 2188766 boasts an elegant design that can complement various kitchen aesthetics. Its sleek finish and contemporary look make it a fitting choice for modern homes.

Overall, the Whirlpool 2188766 is a cleverly designed refrigerator that combines practicality, efficiency, and style. With its robust storage capacity, advanced cooling system, and thoughtful features, it stands out as an excellent choice for anyone looking to enhance their kitchen experience. The longevity and reliability associated with the Whirlpool brand further add to the appeal of this appliance, ensuring that it meets the demands of daily living while providing dependable service for years to come.
Top Page Image Contents