Whirlpool 2188766 manual Handle Removal optional, Style, Door and Hinge Replacement

Page 7

Handle Removal (optional)

1.Apply firm pressure with your hand on the face of trim. Slide top trim up and bottom trim down away from handle. Lift trim pieces off shoulder screws (see Graphic 1).

NOTE: Some models include accent pieces between the handle and the handle trim. If your model includes the accents, you will need to carefully remove them with a flat-blade screwdriver before removing the handle screws. The accent pieces are optional and can be reinstalled or left off of the handle assembly.

2.Remove handle screws and handles.

3.Move refrigerator into place. Replace handles as shown (see Graphic 1).

Door Removal

WARNING

Electrical Shock Hazard Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

1.Unplug refrigerator or disconnect power.

2.Open both refrigerator doors. Remove the base grille by pulling up on the bottom outside corners (see Graphic 2).

3.Close both doors and keep them closed until you are ready to lift them free from the cabinet.

4.If you have a dispenser (ice or water), disconnect the water dispenser tubing located behind the base grille on the freezer door side (see Graphic 3).

■Press the red outer ring against the face of fitting and pull the dispenser tubing free.

■On some models, remove tubing from hose clip.

5.Remove top left hinge screw and cover as shown (see Graphic 4). Do not remove screw 1.

6.Disconnect wiring:

Style 1

■Disconnect wiring plug.

■Remove green ground wire screw to disconnect ground wires.

3

4

1

2

1.Do not remove screw 1

2.Ground wires

3.Green ground wire screw

4.Wiring plug

Style 2

■Disconnect wiring plug.

2 1

1.Do not remove screw 1

2.Wiring plug

7.Carefully lift freezer door straight up off bottom hinge (see Graphic 5). The water dispenser tubing remains attached to the freezer door and pulls through the bottom left hinge. Make sure you protect the dispenser tubing from damage.

8.Remove top right hinge cover and screws as shown (see Graphic 6). Do not remove screw 1.

9.Lift the refrigerator door straight up off bottom hinge.

10.It may not be necessary to remove the bottom hinge to move the refrigerator through a doorway. Both bottom hinges have similar construction. If neccessary, disassemble the hinges as shown (see Graphic 7). Do not remove screw 1.

Door and Hinge Replacement

1.Replace both bottom hinges, if removed. Tighten screws.

2.Assistance may be needed to feed the water dispenser tubing through the bottom hinge while reinstalling the freezer door. Carefully feed the dispenser tubing through the bottom left hinge before replacing the door on the hinge.

NOTE: Provide additional support for the doors while the top hinges are being replaced. Do not depend on the door magnets to hold the doors in place while you are working.

3.Reconnect water dispenser tubing by pushing tubing into fitting until it stops and black mark touches face of fitting (see Graphic 3). On some models, replace tubing in hose clip.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Use & Care Guide Side by Side Refrigerator2188766 Table of Contents Before you throw away your old refrigerator or freezer Refrigerator SafetyLocation Requirements Installation InstructionsCleaning before use UnpackingWater Supply Requirements Electrical RequirementsBase Grille Door Removal Handle Removal optional Door and Hinge ReplacementStyle Door Closing Connecting to Water LineWater Supply Connection Water System Preparation Connecting to Refrigerator StyleEnsuring Proper Air Circulation Using the ControlsRefrigerator USE Normal SoundsWater and Ice Dispensers Water Filtration System Water Filter Status LightFlushing the Water System After Replacing Filter Using the Dispenser Without the Water FilterClean the Ice Storage Bin Ice Maker and Storage BinDeli Drawer Adjustable Flip-up ShelfRefrigerator Shelves Flip-up ShelfWine or Can/Bottle Rack Convertible Vegetable/Meat Drawer Temperature ControlConvertible Vegetable/Meat Drawer Crisper and Covers Crisper Humidity ControlDoor Features Dispenser Light on some models CleaningCleaning your refrigerator Changing the Light BulbsVacation and Moving Care Power InterruptionsTroubleshooting Water dispenser will not operate properly Off-taste, odor or gray color in the iceIce dispenser will not operate properly Ice storage bin difficult to removeDispenser water is not cool enough Temperature is too warmIf you need replacement parts Water flow from the dispenser decreases noticeablyWater Filter Certifications AccessoriesSubstance Reduction Min. Required % Product Data SheetsApplication Guidelines/Water Supply Parameters Whirlpool Corporation will not pay for Warranty2188766

2188766 specifications

The Whirlpool 2188766 is a standout appliance known for its quality and practicality, specifically tailored for enhancing kitchen efficiency and user convenience. This refrigerator has been designed with a focus on maximizing storage space while ensuring that food items are kept at optimal freshness levels.

One of the main features of the Whirlpool 2188766 is its spacious interior, which includes adjustable shelves that can be customized according to the user's needs. This flexibility allows for the easy accommodation of larger items, making it effortless to store everything from tall bottles to bulky containers. Additionally, the refrigerator is equipped with humidity-controlled crispers that are ideal for fruits and vegetables, helping to retain moisture and prevent spoilage.

The technology incorporated into the Whirlpool 2188766 is quite advanced, with the brand’s commitment to innovation evident in its cooling system. This model utilizes a high-efficiency compressor that ensures consistent temperature control, keeping all contents at the perfect temperature. Notably, the refrigerator is designed to be energy efficient, which can lead to significant savings on electricity bills while also being more environmentally friendly.

Another remarkable characteristic of the Whirlpool 2188766 is its user-friendly interface. The layout and design promote effortless organization, with ample door bins that offer easy access to frequently used items. Moreover, the interior lighting employs LED technology, providing bright illumination while consuming less energy and enhancing visibility.

In addition to its practicality, the Whirlpool 2188766 boasts an elegant design that can complement various kitchen aesthetics. Its sleek finish and contemporary look make it a fitting choice for modern homes.

Overall, the Whirlpool 2188766 is a cleverly designed refrigerator that combines practicality, efficiency, and style. With its robust storage capacity, advanced cooling system, and thoughtful features, it stands out as an excellent choice for anyone looking to enhance their kitchen experience. The longevity and reliability associated with the Whirlpool brand further add to the appeal of this appliance, ensuring that it meets the demands of daily living while providing dependable service for years to come.
Top Page Image Contents