Whirlpool 2188766 manual Water System Preparation, Connecting to Refrigerator Style

Page 9

Connecting to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help prevent damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

7.Plug in refrigerator or reconnect power.

8.Flush the water system. See the “Water System Preparation” section.

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

Style 3

1.Unplug refrigerator or disconnect power.

2.Remove the shipping tape from the gray, coiled water tubing on the rear of the refrigerator.

3.Thread the provided nut onto the water valve as shown.

1

2

1.

Tube clamp

3.

Compression nut

2.

Copper tubing

4.

Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄ in. (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

7.Plug in refrigerator or reconnect power.

8.Flush the water system. See the “Water System Preparation” section.

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove the shipping tape from the gray, coiled water tubing on the rear of the refrigerator.

3.Thread the provided nut onto the coupling on the end of the copper tubing. Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

 

1

2

3

4

5

6

1.

Line to refrigerator

4.

Coupling (purchased)

2.

Nut (provided)

 

5.

Ferrule (purchased)

3.

Bulb

 

 

6.

Nut (purchased)

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄ in. (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

1.Bulb

2.Nut (provided)

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄ in. (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

7.Plug in refrigerator or reconnect power.

8.Flush the water system. See the “Water System Preparation” section.

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

Water System Preparation

(on some models)

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly cleaned.

1.Open the freezer door and turn off the ice maker by lifting up the wire shutoff arm as shown.

MAX

NORMAL

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Side by Side Refrigerator Use & Care Guide2188766 Table of Contents Before you throw away your old refrigerator or freezer Refrigerator SafetyCleaning before use Installation InstructionsUnpacking Location RequirementsElectrical Requirements Water Supply RequirementsBase Grille Door Removal Door and Hinge Replacement Handle Removal optionalStyle Connecting to Water Line Door ClosingWater Supply Connection Water System Preparation Connecting to Refrigerator StyleRefrigerator USE Using the ControlsNormal Sounds Ensuring Proper Air CirculationWater and Ice Dispensers Water Filtration System Water Filter Status LightClean the Ice Storage Bin Using the Dispenser Without the Water FilterIce Maker and Storage Bin Flushing the Water System After Replacing FilterRefrigerator Shelves Adjustable Flip-up ShelfFlip-up Shelf Deli DrawerConvertible Vegetable/Meat Drawer Crisper and Covers Convertible Vegetable/Meat Drawer Temperature ControlCrisper Humidity Control Wine or Can/Bottle RackDoor Features Cleaning your refrigerator CleaningChanging the Light Bulbs Dispenser Light on some modelsVacation and Moving Care Power InterruptionsTroubleshooting Ice dispenser will not operate properly Off-taste, odor or gray color in the iceIce storage bin difficult to remove Water dispenser will not operate properlyIf you need replacement parts Temperature is too warmWater flow from the dispenser decreases noticeably Dispenser water is not cool enoughWater Filter Certifications AccessoriesProduct Data Sheets Substance Reduction Min. Required %Application Guidelines/Water Supply Parameters Warranty Whirlpool Corporation will not pay for2188766

2188766 specifications

The Whirlpool 2188766 is a standout appliance known for its quality and practicality, specifically tailored for enhancing kitchen efficiency and user convenience. This refrigerator has been designed with a focus on maximizing storage space while ensuring that food items are kept at optimal freshness levels.

One of the main features of the Whirlpool 2188766 is its spacious interior, which includes adjustable shelves that can be customized according to the user's needs. This flexibility allows for the easy accommodation of larger items, making it effortless to store everything from tall bottles to bulky containers. Additionally, the refrigerator is equipped with humidity-controlled crispers that are ideal for fruits and vegetables, helping to retain moisture and prevent spoilage.

The technology incorporated into the Whirlpool 2188766 is quite advanced, with the brand’s commitment to innovation evident in its cooling system. This model utilizes a high-efficiency compressor that ensures consistent temperature control, keeping all contents at the perfect temperature. Notably, the refrigerator is designed to be energy efficient, which can lead to significant savings on electricity bills while also being more environmentally friendly.

Another remarkable characteristic of the Whirlpool 2188766 is its user-friendly interface. The layout and design promote effortless organization, with ample door bins that offer easy access to frequently used items. Moreover, the interior lighting employs LED technology, providing bright illumination while consuming less energy and enhancing visibility.

In addition to its practicality, the Whirlpool 2188766 boasts an elegant design that can complement various kitchen aesthetics. Its sleek finish and contemporary look make it a fitting choice for modern homes.

Overall, the Whirlpool 2188766 is a cleverly designed refrigerator that combines practicality, efficiency, and style. With its robust storage capacity, advanced cooling system, and thoughtful features, it stands out as an excellent choice for anyone looking to enhance their kitchen experience. The longevity and reliability associated with the Whirlpool brand further add to the appeal of this appliance, ensuring that it meets the demands of daily living while providing dependable service for years to come.
Top Page Image Contents