Changing the bin door panel
You can easily change the color of the front panel on the storage bin door. Six colors are available: Black, Almond, Harvest Gold, White, Toast and Platinum.
To change panel:
1.Open the storage bin door. Remove the two screws on the top of the door, which hold the handle.
2.Loosen the screws in both of the side trim pieces.
3.Remove the handle and the handle
insert.
4.Carefully slide the panels out. You will find three panels with six colors.
5.Choose the color you want to show and carefully slide the panels back into the door. NOTE: Be careful not to scratch the panels as they are inserted.
6.Replace the handle insert and tighten
the screws in both side trim pieces. Replace the handle and the screws.
Note: you can make a decorative wood front to match existing cabinets. The panel should be Y4” (6 mm) thick and 17” x llY4” (433 mm x 286 mm). Remove the color panels and break off the ribs on the door insulation to allow for wood thickness.
Changing the light bulb
The ice maker has a light bulb in the top of the storage bin. To replace it, open the bin door and follow these instructions:
1.Remove the two thumb screws and slide the ice cutter grid forward, out of the two slots near the water pan. Set the ice cutter grid on the bin door.
2.Press the front of the light shield in while pulling down to remove it from the light bracket.
3.Remove bulb. Replace with a
4.Replace the light shield, ice cutter grid and two thumb screws.