Alternate drain hose connection methods | Whirlpool 3369092 REV. A

Floor Damage

Tilt dishwasher backwards on wheels when moving across floor.

Failure to do so may cause damage to floor covering.

8w Latch dishwasher door. Push dishwasher into place, sliding drain hose through hole cut in cabinet opening.

Do not pinch power supply cord or kink power supply cable between dishwasher and cabinet. Check that front leveling legs are firmly against the floor. Align dishwasher door with cabinet doors, so that spacing isthe same on both sides.

9w Connect drain hose to an air gap or waste tee using one of the recommended or alternate methods.

Cut hose connector to fit. if needed.

If connecting drain hose to an air gap or waste tee, cut end of drain hose as shown,

Secure drain hose with screw-type or spring-type hose clamp (clamp type varies with models.)

Do Not cut drain hose when connecting to a 7/8” disposer connector. Knock out plug from disposer inlet. Secure drain hose with hose clamp provided.

DO NOT cut ribbed section to shorten drain hose.

drain hose

Recommended drain hose connection methods:

Drain hose to air gap to waste tee.

	Air-gap	kit
A	&Part	No.

Rubber connector 3

Waste tee <

minimum

clearance to floor

abbve trap.

Drain hose to air gap to disposer.

connector to fit.

clearance	t
to floor	U
I	Pk	I I
	Entry must be	I I
	Entry must be
	above trap.

Install air gap (Part No. 300096)’ according to kit instructions. If other brands of air gaps are used, they should be checked to make sure they allow for the same water flow.

Connect the air gap to a waste tee* or disposer using a rubber connector*.

Most disposers have 7/8” connectors or special connectors are available at plumbing supply houses. Be sure to remove the disposer plug before connecting the drain hose.

Alternate drain hose connection methods:

Drain hose to waste tee. Cut hose

If local plumbing codes permit, dishwasher drain hose may be connected directly to waste tee*. The waste tee connection MUSTbe made ahead of the trap and a minimum of 20” above the floor.

Drain hose to disposer.

‘5b connector.

clearance to floor

If local plumbing codes permit, dishwasher drain hose may be connected directly to disposer. Most disposers have 7/8” connectors or special connectors are available at plumbing supply houses. Be sure to remove the disposer plug before connecting the drain hose.

*All parts are available through your dealer or local hardware or plumbing store.

Numbers correspond to steps.

Panel C

3369092 REV. A specifications

The Whirlpool 3369092 REV. A is a versatile and innovative appliance that enhances the functionality of a kitchen while showcasing modern engineering prowess. Designed primarily as a replacement part for various Whirlpool refrigerators, this component delivers reliability and efficiency, ensuring optimal performance in food storage.

One of the main features of the Whirlpool 3369092 REV. A is its robust construction, which is made to withstand the rigors of daily use. The component is crafted from high-quality materials, making it durable and resistant to wear and tear. This durability is crucial for maintaining long-term performance in busy household environments.

In terms of technology, the Whirlpool 3369092 REV. A incorporates advancements that cater to energy efficiency. Efficient appliances are a priority for modern consumers, and this component plays a role in reducing energy consumption, which can lead to substantial savings on utility bills. By optimizing the refrigerator’s operation, this part ensures that food stays fresh without consuming excessive power.

Moreover, the design of the Whirlpool 3369092 REV. A emphasizes ease of installation. The part is engineered to fit seamlessly into compatible refrigerator models, making it a straightforward task for users to replace worn-out components. This user-friendly approach is especially valuable for those who may not have extensive technical knowledge, as it allows for quick repairs without professional help.

Another characteristic to highlight is the adaptability of the Whirlpool 3369092 REV. A. It is designed to work with a variety of Whirlpool refrigerator models, making it a versatile choice for maintenance. This adaptability ensures that consumers can find a reliable replacement without needing to worry about compatibility issues.

In conclusion, the Whirlpool 3369092 REV. A stands out as a significant component that enhances refrigerator performance through its durable construction, energy efficiency, user-friendly installation, and broad compatibility with various models. For anyone looking to maintain their Whirlpool refrigerator, investing in this component is a smart decision that promises to extend the life of their appliance while ensuring optimal functionality. It is a testament to Whirlpool's commitment to quality and innovation in the home appliance sector.