Whirlpool W10238252A Product Dimensions Electrical Requirements, Installation Dimensions

Page 3

Installation Dimensions

NOTE: The grounded 3 prong outlet must be inside the upper cabinet. See “Electrical Requirements” section.

AB

30"

(76.2 cm)

min.

30" (76.2 cm) typical*

12" (30.5 cm) min. 14" (35.6 cm) max.

66" (167.6 cm) min.

A. 2" x 4" wall stud

B. Grounded 3 prong outlet

*30" (76.2 cm) is typical for 66" (167.6 cm) installation height. Exact dimensions may vary depending on type of range/cooktop below.

Product Dimensions

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Observe all governing codes and ordinances.

Required:

A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

Recommended:

A time-delay fuse or time-delay circuit breaker.

A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

17¹⁄₄" (43.8 cm)

15

³⁄₄

"

(40.

 

0

cm)

 

16¹⁄₄" (41.3 cm)

 

 

.0 cm)

 

" (76

⁷⁄₈

 

29

 

 

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

SAVE THESE INSTRUCTIONS

3

Image 3
Contents Microwave Hood Combination Safety Microwave Hood Combination Installation InstructionsLocation Requirements Installation RequirementsTools and Parts Remove Cardboard TemplateRecommended Product Dimensions Electrical RequirementsInstallation Dimensions RequiredRotate Blower Motor Installation InstructionsWall Venting Installation Only Remove Mounting PlateRoof Venting Installation Only Wall Stud at One End Hole Wall Studs at Both End Holes Possible Wall Stud ConfigurationsLocate Wall Studs No Wall Studs at End HolesInstallation for No Wall Studs at End Holes Figures 1 Mark Rear WallDrill Holes in Rear Wall Prepare Upper Cabinet Attach Mounting Plate to WallInstall Damper Assembly Install the Microwave OvenFor Roof Venting Installation Only Complete Installation Recommended Standard Fittings Venting Design SpecificationsFor optimal venting installation, we recommend Rectangular to Round TransitionAccessories Replacement PartsAssistance

W10238253A, W10238252A specifications

Whirlpool appliances are synonymous with quality and performance, and the models W10238252A and W10238253A are no exception. Designed to enhance the efficiency and functionality of your home, these kitchen components reflect the brand's commitment to innovation and user convenience.

The W10238252A and W10238253A are primarily known as replacement parts for Whirlpool refrigerators, specifically designed as water filter cartridges. They play a crucial role in ensuring that the water dispensed from your refrigerator is clean and safe for consumption. The main feature of these models is their advanced filtration technology, which effectively reduces contaminants while improving the taste and odor of the water.

Manufactured with high-quality materials, these filters are designed to capture various impurities, including chlorine, lead, and other harmful substances. This not only contributes to healthier drinking water but also protects the internal components of your refrigerator from damage caused by sediment buildup. This reliability makes both cartridges valuable assets for any household that prioritizes health and safety.

One standout characteristic of the W10238252A and W10238253A filters is their easy installation process. Designed with the user in mind, these filters can be quickly replaced without the need for special tools. This convenience encourages regular maintenance, ensuring your family always has access to purified water.

Additionally, both filters boast a long life span, capable of filtering water for up to six months under normal usage conditions. This durability means less frequent replacements and a cost-effective solution for long-term use.

The filters comply with industry standards for performance and safety, showcasing Whirlpool's dedication to meeting customer expectations. They are also compatible with various Whirlpool refrigerator models, further enhancing their versatility across different kitchens.

In conclusion, the Whirlpool W10238252A and W10238253A water filter cartridges offer an exceptional combination of efficiency, safety, and convenience. Their advanced filtration technology and user-friendly design make them essential for any household committed to enjoying pure, great-tasting water straight from the refrigerator. Investing in these filters is a step towards improved health and well-being, underscoring Whirlpool's role as a leader in home appliance innovation.