Whirlpool MT4110SP manual Cl0, To Recall, Programmed Oven Cooking Feature

Cl0

Touch the numbered pad “5.” 50, the power level selected (5), will appear in the Readout Display un- til the start/stop pad is touched.

onds. After 3 seconds, the Time Readout Display will return to the current timing.

To recall a power level, first touch the function pad (defrost, cook 1, cook 2 or probe] then the power level pad. The power level for the function touched will ap- pear in the Time Readout Display for 3 seconds and then will return to the current timing.

If a timing, temperature or power level is recalled when the oven is not in operation, the numbers will remain in the Time Readout Dis- play until you either program a new entry, touch the reset pad to cancel the function or touch the start/stop pad.

5.Touch the start/stop pad and vari- able power defrosting begins.

The preselected defrost time reap- pears in the Readout Display and begins to count down to “0.”

During a Variable Power Defrost operation, you may hear a sound from the magnetron tube cycling on and off and see the numbers in the Readout Display flicker very slightly as the tube cycles.

To Recall

It is possible to recall a timing, temperature probe setting, the de- layed start time or the time-of-day whenever the oven is in use. Just touch the desired function pad and the preset timing, tem- perature, delayed start time or time-of-day will reappear in the Time Readout Display for 3 sec-

Programmed Oven Cooking Feature

This feature lets you program the oven to perform several operations in sequence. Just set the oven one time and it will automatically go from one operation to the next until all opera- tions are completed. The oven will then signal the end of the program and turn off.

For your convenience there are indi- cator lights to show you which opera- tions have been set. If +he Basic Pro- gram, as described below. is set, all 4 indicator lights (defrost, cook 1. cook 2, timer) will turn on. As the oven per- forms an operation, the correspond- ing indicator light will turn off signal- ing the completion of that operation.

The following chart is the Basic Pro- gram with the variations available for each of the operations. You can set the oven to perform all 4 operations in the Basic Program or any combination of the variations as suggested in the chart. Whatever program you select. the oven will perform those opera- tions in the sequence as shown in the chart.