The COOK POWER Signal Light will come on and the Display will show two O’s
Touch COOK POWER. (It you want the hlgh Cook Power, sklp to step 10.)
Touch a Number Pad for the Cook Power you want In the second cycle.
10. Touch START.
count down
count down
than high All other Signal Lights will go off
The Drsplay counts down the cooking time to show how much time is left in each cycle
For 2 of every 10 seconds of countdown, the Display wtll show the Cook Power you selected, if you are using a Cook Power other than high
You will hear one beep at the end of COOK CYCLE 1 You can either open the door to check the food, or you can let the oven start the next cycle If you do open the door, touch START after closing the door to
other than high
The Display counts down the time to show how much time IS left in the second cycle
In 2 out of every 10 seconds, the Display will show the Cook Power you selected if you are using a Cook Power other than high.
When the last cvcle ends vou will hear
4 beeps. [You can stop the beeping by opening the door or touching CANCEL.) When the beeping stopsthe Display will show the time of day
Changing or adding instructions
You can change times, Cook Powers, or add COOK CYCLE 2 at anytime during oven operation.
1Touch the Cook Cycle you wish to change or add (COOK CYCLE 1 or 2).
2Touch numbers for new time, if desired.
3Touch COOK POWER, if desired.
4Touch number for new Cook Power or touch COOK POWER again if high is desired
5Touch START
12